MC75 AT Command Set

More documents

Recommendations

Info

MC75 AT Command Set 11.9 AT+CGPADDR s 11.9 AT+CGPADDR Show PDP address Syntax Test Command AT+CGPADDR=? Response(s) [+CGPADDR: (list of defined s)] OK Write Command AT+CGPADDR=[[,]] Response(s) [+CGPADDR: , ] [+CGPADDR: , ] OK ERROR +CME ERROR Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last GSM 07.07 % % % % % % % ! % ! Command Description The test command returns a list of defined s. The write command returns a list of PDP addresses for the specified context identifiers. If no is specified, the addresses for all defined contexts are returned. Parameter Description (num) A numeric parameter which specifies a particular PDP context definition (see AT+CGDCONT command). (str) A string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic. Note • If no is specified, the write command will return a list of all defined contexts. MC75_ATC_V01.001 Page 282 of 475 6/2/05 Confidential / Released
MC75 AT Command Set 11.10 AT+CGQMIN s 11.10 AT+CGQMIN Quality of Service Profile (Minimum acceptable) Syntax Test Command AT+CGQMIN=? Response(s) +CGQMIN: , (list of supported s), (list of supported s), (list of supported s), (list of supported s), (list of supported s) OK ERROR +CME ERROR Read Command AT+CGQMIN? Response(s) [+CGQMIN: , , , , , ] [+CGQMIN: ...] OK ERROR +CME ERROR Write Command AT+CGQMIN=[[, [, [, [, [, ]]]]]] Response(s) OK ERROR +CME ERROR Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last GSM 07.07 % % % % % % % ! % ! Command Description The test command returns values supported as a compound value. If the MT supports several PDP types, the parameter value ranges for each PDP type are returned on a separate line. The read command returns the current settings for each defined context. This command allows the TE to specify a minimum acceptable profile which is checked by the MT against the negotiated profile returned in the Activate PDP Context Accept message. The set command specifies a profile for the context identified by the (local) context identification parameter, . A special form of the set command, AT+CGQMIN= causes the minimum acceptable profile for context number to become undefined. In this case no check is made against the negotiated profile. AT&F and ATZ will undefine the minimum QoS profiles of every context which is not active or not online. Parameter Description (num) Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is used in other PDP context-related commands. 1...2 MC75_ATC_V01.001 Page 283 of 475 6/2/05 Confidential / Released
Page 1 and 2:
s MC75 Siemens Cellular Engine Vers
Page 3 and 4:
MC75 AT Command Set Contents s Cont
Page 5 and 6:
MC75 AT Command Set Contents s 6.9
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
MC75 AT Command Set List of Figures
Page 13 and 14:
MC75 AT Command Set 1.2 Related doc
Page 15 and 16:
MC75 AT Command Set 1.3 Document co
Page 17 and 18:
MC75 AT Command Set 1.4 AT Command
Page 19 and 20:
MC75 AT Command Set 1.5 Supported c
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
MC75 AT Command Set 1.7 Unsolicited
Page 27 and 28:
MC75 AT Command Set 1.9 Errors and
Page 29 and 30:
MC75 AT Command Set 2.2 AT&V s 2.2
Page 31 and 32:
MC75 AT Command Set 2.2 AT&V s Tabl
Page 33 and 34:
MC75 AT Command Set 2.4 ATQ s 2.4 A
Page 35 and 36:
MC75 AT Command Set 2.6 ATX s 2.6 A
Page 37 and 38:
MC75 AT Command Set 2.8 ATZ s 2.8 A
Page 39 and 40:
MC75 AT Command Set 2.9 AT+CFUN s U
Page 41 and 42:
MC75 AT Command Set 2.9 AT+CFUN s E
Page 43 and 44:
MC75 AT Command Set 2.11 AT+GCAP s
Page 45 and 46:
MC75 AT Command Set 2.12 AT+CMEE s
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
MC75 AT Command Set 2.14 AT^SCFG s
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
MC75 AT Command Set 3. Status Contr
Page 63 and 64:
MC75 AT Command Set 3.2 AT+CIND s 3
Page 65 and 66:
MC75 AT Command Set 3.2 AT+CIND s N
Page 67 and 68:
MC75 AT Command Set 3.3 AT^SIND s U
Page 69 and 70:
MC75 AT Command Set 3.3 AT^SIND s u
Page 71 and 72:
MC75 AT Command Set 3.3 AT^SIND s
Page 73 and 74:
MC75 AT Command Set 3.4 AT+CEER s E
Page 75 and 76:
MC75 AT Command Set 3.4 AT+CEER s N
Page 77 and 78:
MC75 AT Command Set 3.4 AT+CEER s N
Page 79 and 80:
MC75 AT Command Set 3.5 ATS18 s 3.5
Page 81 and 82:
MC75 AT Command Set 3.6 AT+CPAS s 3
Page 83 and 84:
MC75 AT Command Set 4. Serial Inter
Page 85 and 86:
MC75 AT Command Set 4.3 AT&D s 4.3
Page 87 and 88:
MC75 AT Command Set 4.5 ATE s 4.5 A
Page 89 and 90:
MC75 AT Command Set 4.6 AT+ICF s No
Page 91 and 92:
MC75 AT Command Set 4.7 AT+IFC s No
Page 93 and 94:
MC75 AT Command Set 4.8 AT+ILRR s 1
Page 95 and 96:
MC75 AT Command Set 4.9 AT+IPR s 14
Page 97 and 98:
MC75 AT Command Set 4.10 AT+CMUX s
Page 99 and 100:
MC75 AT Command Set 4.10 AT+CMUX s
Page 101 and 102:
MC75 AT Command Set 4.11 AT^STPB s
Page 103 and 104:
MC75 AT Command Set 5.1 AT+CPIN s
Page 105 and 106:
MC75 AT Command Set 5.1 AT+CPIN s S
Page 107 and 108:
MC75 AT Command Set 5.2 AT+CPIN2 s
Page 109 and 110:
MC75 AT Command Set 5.3 AT^SPIC s
Page 111 and 112:
MC75 AT Command Set 5.3 AT^SPIC s a
Page 113 and 114:
MC75 AT Command Set 5.4 AT+CLCK s
Page 115 and 116:
MC75 AT Command Set 5.4 AT+CLCK s 6
Page 117 and 118:
MC75 AT Command Set 5.5 AT^SLCK s 5
Page 119 and 120:
MC75 AT Command Set 5.6 AT+CPWD s
Page 121 and 122:
MC75 AT Command Set 5.6 AT+CPWD s E
Page 123 and 124:
MC75 AT Command Set 5.7 AT^SPWD s P
Page 125 and 126:
MC75 AT Command Set 5.8 AT^SCSL s
Page 127 and 128:
MC75 AT Command Set 5.8 AT^SCSL s A
Page 129 and 130:
MC75 AT Command Set 6.2 AT+CGMI s 6
Page 131 and 132:
MC75 AT Command Set 6.6 AT+CGMR s 6
Page 133 and 134:
MC75 AT Command Set 6.10 AT+CIMI s
Page 135 and 136:
MC75 AT Command Set 7.2 ATA s 7.2 A
Page 137 and 138:
MC75 AT Command Set 7.3 ATD s (str
Page 139 and 140:
MC75 AT Command Set 7.4 ATD> s Note
Page 141 and 142:
MC75 AT Command Set 7.6 ATD> s 7.6
Page 143 and 144:
MC75 AT Command Set 7.8 ATDL s 7.8
Page 145 and 146:
MC75 AT Command Set 7.10 AT+CHUP s
Page 147 and 148:
MC75 AT Command Set 7.11 AT^SHUP s
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
MC75 AT Command Set 7.17 ATO s 7.17
Page 155 and 156:
MC75 AT Command Set 7.19 AT+CBST s
Page 157 and 158:
MC75 AT Command Set 7.20 AT+CRLP s
Page 159 and 160:
MC75 AT Command Set 7.21 AT+CLCC s
Page 161 and 162:
MC75 AT Command Set 7.22 AT^SLCC s
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
MC75 AT Command Set 7.24 AT+CRC s 7
Page 169 and 170:
MC75 AT Command Set 7.26 AT^SCNI s
Page 171 and 172:
MC75 AT Command Set 7.28 AT^STCD s
Page 173 and 174:
MC75 AT Command Set 8. Network Serv
Page 175 and 176:
MC75 AT Command Set 8.2 AT+COPS s R
Page 177 and 178:
MC75 AT Command Set 8.3 AT^SOPS s
Page 179 and 180:
MC75 AT Command Set 8.4 AT+CREG s
Page 181 and 182:
MC75 AT Command Set 8.5 AT+CSQ s 8.
Page 183 and 184:
MC75 AT Command Set 8.6 AT^SMONC s
Page 185 and 186:
MC75 AT Command Set 8.7 AT^SMOND s
Page 187 and 188:
MC75 AT Command Set 8.8 AT^MONI s 8
Page 189 and 190:
MC75 AT Command Set 8.8 AT^MONI s C
Page 191 and 192:
MC75 AT Command Set 8.9 AT^MONP s 8
Page 193 and 194:
MC75 AT Command Set 8.10 AT^SMONG s
Page 195 and 196:
MC75 AT Command Set 8.11 AT^SALS s
Page 197 and 198:
MC75 AT Command Set 8.13 AT^SPLM s
Page 199 and 200:
MC75 AT Command Set 8.15 AT^SPLR s
Page 201 and 202:
MC75 AT Command Set 9. Supplementar
Page 203 and 204:
MC75 AT Command Set 9.2 AT^SACM s
Page 205 and 206:
MC75 AT Command Set 9.4 AT+CAOC s 9
Page 207 and 208:
MC75 AT Command Set 9.5 AT+CCUG s
Page 209 and 210:
MC75 AT Command Set 9.6 AT+CCFC s
Page 211 and 212:
MC75 AT Command Set 9.6 AT+CCFC s
Page 213 and 214:
MC75 AT Command Set 9.7 AT+CCWA s P
Page 215 and 216:
MC75 AT Command Set 9.7 AT+CCWA s E
Page 217 and 218:
MC75 AT Command Set 9.8 AT+CHLD s N
Page 219 and 220:
MC75 AT Command Set 9.9 AT+CLIP s P
Page 221 and 222:
MC75 AT Command Set 9.11 AT+COLP s
Page 223 and 224:
MC75 AT Command Set 9.12 AT+CPUC s
Page 225 and 226:
MC75 AT Command Set 9.13 AT+CSSN s
Page 227 and 228:
MC75 AT Command Set 9.14 AT+CUSD s
Page 229 and 230:
MC75 AT Command Set 10. Internet Se
Page 231 and 232: MC75 AT Command Set 10.1 AT^SICS s
Page 237 and 238: MC75 AT Command Set 10.2 AT^SISS s
Page 249 and 250: MC75 AT Command Set 10.3 AT^SISO s
Page 251 and 252: MC75 AT Command Set 10.3 AT^SISO s
Page 253 and 254: MC75 AT Command Set 10.4 AT^SISC s
Page 255 and 256: MC75 AT Command Set 10.5 AT^SISR s
Page 257 and 258: MC75 AT Command Set 10.5 AT^SISR s
Page 259 and 260: MC75 AT Command Set 10.6 AT^SISW s
Page 261 and 262: MC75 AT Command Set 10.7 Informatio
Page 263 and 264: MC75 AT Command Set 11. GPRS Comman
Page 265 and 266: MC75 AT Command Set 11.2 AT+CGANS s
Page 267 and 268: MC75 AT Command Set 11.3 AT+CGATT s
Page 269 and 270: MC75 AT Command Set 11.4 AT+CGAUTO
Page 271 and 272: MC75 AT Command Set 11.5 AT+CGDATA
Page 273 and 274: MC75 AT Command Set 11.6 AT+CGDCONT
Page 275 and 276: MC75 AT Command Set 11.7 AT+CGEQMIN
Page 277 and 278: MC75 AT Command Set 11.7 AT+CGEQMIN
Page 279 and 280: MC75 AT Command Set 11.8 AT+CGEQREQ
Page 281: MC75 AT Command Set 11.8 AT+CGEQREQ
Page 285 and 286: MC75 AT Command Set 11.10 AT+CGQMIN
Page 287 and 288: MC75 AT Command Set 11.11 AT+CGQREQ
Page 289 and 290: MC75 AT Command Set 11.11 AT+CGQREQ
Page 291 and 292: MC75 AT Command Set 11.12 AT+CGREG
Page 293 and 294: MC75 AT Command Set 11.13 AT+CGSMS
Page 295 and 296: MC75 AT Command Set 11.14 AT^SGACT
Page 297 and 298: MC75 AT Command Set 11.16 AT^SGCONF
Page 299 and 300: MC75 AT Command Set 11.17 ATA s 11.
Page 301 and 302: MC75 AT Command Set 11.19 ATD*98# s
Page 303 and 304: MC75 AT Command Set 11.21 ATS0 s 11
Page 305 and 306: MC75 AT Command Set 11.22 Using GPR
Page 307 and 308: MC75 AT Command Set 12. FAX Command
Page 309 and 310: MC75 AT Command Set 12.3 AT+FRH s 1
Page 311 and 312: MC75 AT Command Set 12.5 AT+FRS s 1
Page 313 and 314: MC75 AT Command Set 12.7 AT+FTM s 1
Page 315 and 316: MC75 AT Command Set 13. Short Messa
Page 317 and 318: MC75 AT Command Set 13.1 SMS parame
Page 319 and 320: MC75 AT Command Set 13.1 SMS parame
Page 321 and 322: MC75 AT Command Set 13.3 AT+CMGD s
Page 323 and 324: MC75 AT Command Set 13.5 AT+CMGL s
Page 325 and 326: MC75 AT Command Set 13.6 AT+CMGR s
Page 327 and 328: MC75 AT Command Set 13.7 AT+CMGS s
Page 329 and 330: MC75 AT Command Set 13.8 AT+CMGW s
Page 331 and 332: MC75 AT Command Set 13.9 AT+CMSS s
Page 333 and 334:
MC75 AT Command Set 13.11 AT+CNMI s
Page 335 and 336:
MC75 AT Command Set 13.11 AT+CNMI s
Page 337 and 338:
MC75 AT Command Set 13.12 AT+CPMS s
Page 339 and 340:
MC75 AT Command Set 13.14 AT+CSCB s
Page 341 and 342:
MC75 AT Command Set 13.16 AT+CSMP s
Page 343 and 344:
MC75 AT Command Set 13.17 AT+CSMS s
Page 345 and 346:
MC75 AT Command Set 13.18 AT^SCML s
Page 347 and 348:
MC75 AT Command Set 13.20 AT^SCMS s
Page 349 and 350:
MC75 AT Command Set 13.22 AT^SLMS s
Page 351 and 352:
MC75 AT Command Set 13.24 AT^SMGO s
Page 353 and 354:
MC75 AT Command Set 13.25 AT^SMGR s
Page 355 and 356:
MC75 AT Command Set 13.27 AT^SSDA s
Page 357 and 358:
MC75 AT Command Set 14. SIM related
Page 359 and 360:
MC75 AT Command Set 14.1 AT+CRSM s
Page 361 and 362:
MC75 AT Command Set 14.2 AT^SXSM s
Page 363 and 364:
MC75 AT Command Set 14.3 AT^SCKS s
Page 365 and 366:
MC75 AT Command Set 14.5 AT^SCID s
Page 367 and 368:
MC75 AT Command Set 15. SIM Applica
Page 369 and 370:
MC75 AT Command Set 15.2 ^SSTN s 15
Page 371 and 372:
MC75 AT Command Set 15.4 AT^SSTR s
Page 373 and 374:
MC75 AT Command Set 16.2 AT+CNUM s
Page 375 and 376:
MC75 AT Command Set 16.3 AT+CPBR s
Page 377 and 378:
MC75 AT Command Set 16.4 AT+CPBS s
Page 379 and 380:
MC75 AT Command Set 16.5 AT+CPBW s
Page 381 and 382:
MC75 AT Command Set 16.5 AT+CPBW s
Page 383 and 384:
MC75 AT Command Set 16.7 AT^SPBC s
Page 385 and 386:
MC75 AT Command Set 16.9 AT^SPBG s
Page 387 and 388:
MC75 AT Command Set 16.9 AT^SPBG s
Page 389 and 390:
MC75 AT Command Set 16.10 AT^SPBS s
Page 391 and 392:
MC75 AT Command Set 16.10 AT^SPBS s
Page 393 and 394:
MC75 AT Command Set 17.2 ATL s 17.2
Page 395 and 396:
MC75 AT Command Set 17.5 AT+CMUT s
Page 397 and 398:
MC75 AT Command Set 17.7 AT+VTS s 1
Page 399 and 400:
MC75 AT Command Set 17.8 AT^SAIC s
Page 401 and 402:
MC75 AT Command Set 17.9 AT^SNFA s
Page 403 and 404:
MC75 AT Command Set 17.11 AT^SNFI s
Page 405 and 406:
MC75 AT Command Set 17.12 AT^SNFM s
Page 407 and 408:
MC75 AT Command Set 17.13 AT^SNFO s
Page 409 and 410:
MC75 AT Command Set 17.15 AT^SNFS s
Page 411 and 412:
MC75 AT Command Set 17.15 AT^SNFS s
Page 413 and 414:
MC75 AT Command Set 17.17 AT^SNFV s
Page 415 and 416:
MC75 AT Command Set 17.19 AT^SRTC s
Page 417 and 418:
MC75 AT Command Set 18. Hardware re
Page 419 and 420:
MC75 AT Command Set 18.2 AT+CALA s
Page 421 and 422:
MC75 AT Command Set 18.3 AT^SBC s 1
Page 423 and 424:
MC75 AT Command Set 18.3 AT^SBC s N
Page 425 and 426:
MC75 AT Command Set 18.5 AT^SCTM s
Page 427 and 428:
MC75 AT Command Set 18.5 AT^SCTM s
Page 429 and 430:
MC75 AT Command Set 18.6 AT^SSYNC s
Page 431 and 432:
MC75 AT Command Set 18.7 AT^SSPI s
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
MC75 AT Command Set 19.2 ATS3 s 19.
Page 441 and 442:
MC75 AT Command Set 19.4 ATS5 s 19.
Page 443 and 444:
MC75 AT Command Set 20. Appendix s
Page 445 and 446:
MC75 AT Command Set 20.2 Star-Hash
Page 447 and 448:
MC75 AT Command Set 20.3 Available
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
MC75 AT Command Set 20.4 Availabili
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
MC75 AT Command Set 20.6 Factory De
Page 467 and 468:
MC75 AT Command Set 20.7 Summary of
Page 469 and 470:
Page 471 and 472:
MC75 AT Command Set 20.9 Alphabetic
Page 473 and 474:
Page 475:
show all

MC75 AT Command Set

Create successful ePaper yourself

Delete template?

Save as template?