MC75 AT Command Set

MC75 AT Command Set
20.9 Alphabetical List of AT Commands
s
AT Command Description Section and Page
ATDL Redial last number used Section 7.8, page 143
ATE Enable command echo Section 4.5, page 87
ATH Disconnect existing connection Section 7.9, page 144
ATH
Manual rejection of a network request for PDP context Section 11.20, page 302
activation
ATI Display product identification information Section 6.1, page 128
ATL Set monitor speaker loudness Section 17.2, page 393
ATM Set monitor speaker mode Section 17.3, page 393
ATO
Switch from command mode to data mode / PPP online Section 7.17, page 153
mode
ATP Select pulse dialing Section 7.29, page 172
ATQ Set result code presentation mode Section 2.4, page 33
ATS0 Set number of rings before automatically answering a call Section 7.12, page 148
ATS0
Automatic response to a network request for PDP context Section 11.21, page 303
activation
ATS10
Set disconnect delay after indicating the absence of data
carrier
Section 7.16, page 152
ATS18 Extended call release report Section 3.5, page 79
ATS3 Set command line termination character Section 19.2, page 439
ATS4 Set response formatting character Section 19.3, page 440
ATS5 Write command line editing character Section 19.4, page 441
ATS6 Set pause before blind dialing Section 7.13, page 149
ATS7 Set number of seconds to wait for connection completion Section 7.14, page 150
ATS8 Set number of seconds to wait for comma dialing modifier Section 7.15, page 151
ATT Select tone dialing Section 7.30, page 172
ATV Set result code format mode Section 2.5, page 34
ATX Set CONNECT result code format and call monitoring Section 2.6, page 35
ATZ Set all current parameters to user defined profile Section 2.8, page 37
MC75_ATC_V01.001 Page 475 of 475 6/2/05
Confidential / Released