MC75 AT Command Set

MC75 AT Command Set
11.8 AT+CGEQREQ
s
(num)
0 conversational
1 streaming
2 interactive
3 background
[4] subscribed value
(num)
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...128 (value needs to be divisible by 8 without remainder)
256
512
(num)
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...256 (value needs to be divisible by 8 without remainder)
512
(num)
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...128 (value needs to be divisible by 8 without remainder)
(num)
This parameter indicates the guaranteed number of kbits/s delivered by UMTS (down-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...256 (value needs to be divisible by 8 without remainder)
(num)
This parameter indicates whether the UMTS bearer shall provide in-sequence SDU delivery or not.
0 no
1 yes
[2] subscribed value
MC75_ATC_V01.001 Page 279 of 475 6/2/05
Confidential / Released