MC75 AT Command Set

MC75 AT Command Set
10.2 AT^SISS
s
OK
at^siss=1,address,"socktcp://
10.10.0.187:65534"
OK
The service profile of the client contains the IP
address and the TCP port of the remote host.
10.2.3 Example: Configuring and Using FTP Download
First set up a connection profile as explained in Section 10.1.1 or Section 10.1.2. Enter at least all parameters
which are mandatory for the connection profile.
Configure the service profile 1 for FTP:
at^siss=1,srvType,ftp
Select service type FTP.
OK
at^siss=1,conId,0 Select connection profile 0.
OK
at^siss=1,address,"ftp://
192.168.1.2;type=d"
OK
Make an FTP connection:
Specify FTP address with user and password anonymous.
at^siso=1
OK
^SISR: 1, 1
at^sisr=1,1500
^SISR: 1, 50
hardware
inttest
software
support
systemtest
OK
^SISR: 1, 2
at^sisc=1
OK
Open the service.
Bearer is established, service is getting started.
Data are available.
Request to read 1500 bytes.
50 bytes are now available.
Data transfer finished. No more data available. The
connection to the FTP server is closed.
Close the service.
10.2.4 Example: Configuring and Using FTP Upload
First set up a connection profile as explained in Section 10.1.1 or Section 10.1.2. Enter at least all parameters
which are mandatory for the connection profile.
Configure the service profile 1 for FTP:
at^siss=1,srvType,ftp
Select service type FTP.
OK
at^siss=1,conId,0 Select connection profile 0.
OK
at^siss=1,address,"ftpput://
myname:mypasswd@192.168.1.2/upload/example.txt"
OK
Make an FTP connection:
Specify FTP address with individual user name and
password. The file "example.txt" shall be created on
the FTP server.
at^siso=1
OK
Open the service.
Bearer is established, service is getting started.
MC75_ATC_V01.001 Page 245 of 475 6/2/05
Confidential / Released