MC75 AT Command Set

More documents

Recommendations

Info

MC75 AT Command Set 12.8 AT+FTS s 12.8 AT+FTS Stop Transmission and Wait Syntax Write Command AT+FTS= Response(s) An ERROR response code results if this command is issued while the modem is onhook. Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last TIA/EIA-578 ! % ! % % ! ! ! ! ! Command Description This command causes the TA to terminate a transmission and wait for 10 millisecond intervals before responding with the OK result code to the DTE. Parameter Description (num) no. of 10 millisecond intervals 0...85 Note • Used for Fax Class 1 only MC75_ATC_V01.001 Page 314 of 475 6/2/05 Confidential / Released
MC75 AT Command Set 13. Short Message Service (SMS) Commands s 13. Short Message Service (SMS) Commands The AT Commands described in this chapter allow an external application to use the Short Message Service with the MC75. 13.1 SMS parameters Parameter Description (num) Format is same for in case of SMS, but without GSM 24.11 SC address field and parameter shall be bounded by double quote characters like a normal string type rarameter (str)(+CSCS) String type alphanumeric representation of or corresponding to the entry found in phonebook; implementation of this feature is manufacturer specific (num) Command Data GSM 03.40 TP-Command-Data in text mode responses; ME/TA converts each 8-bit octet into two IRA character long hexadecimal numbers (e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA 50 and 65)) (num) Command Type GSM 03.40 TP-Command-Type in integer format [0]...255 (num)(+CSCS) Destination Address GSM 03.40 TP- Destination-Address Address-Value field in string format; BCD numbers (or GSM default alphabet characters) are converted into characters; type of address given by (num)(+CSCS) User Data In case of SMS: GSM 03.40 TP-User-Data in text mode responses; format: • If indicates that GSM 03.38 default alphabet is used and indicates that GSM 03.40 TP-User- Data-Header-Indication is not set: ME/TA converts GSM alphabet into current TE character set according to rules covered in Annex A. • If indicates that 8-bit or UCS2 data coding scheme is used, or indicates that GSM 03.40 TP- User-Data-Header-Indication is set: ME/TA converts each 8-bit octet into hexadecimal numbers con-taining two IRA characters (e.g. octet with integer value 42 is presented to TE as two characters 2A (IRA 50 and 65). In case of CBS: GSM 03.41 CBM Content of Message in text mode responses; format: • If indicates that GSM 03.38 default alphabet is used: ME/TA converts GSM alphabet into current TE character set according to rules covered in Annex A. • If indicates that 8-bit or UCS2 data coding scheme is used: ME/TA converts each 8-bit octet into hexadecimal numbers containing two IRA characters. MC75_ATC_V01.001 Page 315 of 475 6/2/05 Confidential / Released
Page 1 and 2:
s MC75 Siemens Cellular Engine Vers
Page 3 and 4:
MC75 AT Command Set Contents s Cont
Page 5 and 6:
MC75 AT Command Set Contents s 6.9
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
MC75 AT Command Set List of Figures
Page 13 and 14:
MC75 AT Command Set 1.2 Related doc
Page 15 and 16:
MC75 AT Command Set 1.3 Document co
Page 17 and 18:
MC75 AT Command Set 1.4 AT Command
Page 19 and 20:
MC75 AT Command Set 1.5 Supported c
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
MC75 AT Command Set 1.7 Unsolicited
Page 27 and 28:
MC75 AT Command Set 1.9 Errors and
Page 29 and 30:
MC75 AT Command Set 2.2 AT&V s 2.2
Page 31 and 32:
MC75 AT Command Set 2.2 AT&V s Tabl
Page 33 and 34:
MC75 AT Command Set 2.4 ATQ s 2.4 A
Page 35 and 36:
MC75 AT Command Set 2.6 ATX s 2.6 A
Page 37 and 38:
MC75 AT Command Set 2.8 ATZ s 2.8 A
Page 39 and 40:
MC75 AT Command Set 2.9 AT+CFUN s U
Page 41 and 42:
MC75 AT Command Set 2.9 AT+CFUN s E
Page 43 and 44:
MC75 AT Command Set 2.11 AT+GCAP s
Page 45 and 46:
MC75 AT Command Set 2.12 AT+CMEE s
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
MC75 AT Command Set 2.14 AT^SCFG s
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
MC75 AT Command Set 3. Status Contr
Page 63 and 64:
MC75 AT Command Set 3.2 AT+CIND s 3
Page 65 and 66:
MC75 AT Command Set 3.2 AT+CIND s N
Page 67 and 68:
MC75 AT Command Set 3.3 AT^SIND s U
Page 69 and 70:
MC75 AT Command Set 3.3 AT^SIND s u
Page 71 and 72:
MC75 AT Command Set 3.3 AT^SIND s
Page 73 and 74:
MC75 AT Command Set 3.4 AT+CEER s E
Page 75 and 76:
MC75 AT Command Set 3.4 AT+CEER s N
Page 77 and 78:
MC75 AT Command Set 3.4 AT+CEER s N
Page 79 and 80:
MC75 AT Command Set 3.5 ATS18 s 3.5
Page 81 and 82:
MC75 AT Command Set 3.6 AT+CPAS s 3
Page 83 and 84:
MC75 AT Command Set 4. Serial Inter
Page 85 and 86:
MC75 AT Command Set 4.3 AT&D s 4.3
Page 87 and 88:
MC75 AT Command Set 4.5 ATE s 4.5 A
Page 89 and 90:
MC75 AT Command Set 4.6 AT+ICF s No
Page 91 and 92:
MC75 AT Command Set 4.7 AT+IFC s No
Page 93 and 94:
MC75 AT Command Set 4.8 AT+ILRR s 1
Page 95 and 96:
MC75 AT Command Set 4.9 AT+IPR s 14
Page 97 and 98:
MC75 AT Command Set 4.10 AT+CMUX s
Page 99 and 100:
MC75 AT Command Set 4.10 AT+CMUX s
Page 101 and 102:
MC75 AT Command Set 4.11 AT^STPB s
Page 103 and 104:
MC75 AT Command Set 5.1 AT+CPIN s
Page 105 and 106:
MC75 AT Command Set 5.1 AT+CPIN s S
Page 107 and 108:
MC75 AT Command Set 5.2 AT+CPIN2 s
Page 109 and 110:
MC75 AT Command Set 5.3 AT^SPIC s
Page 111 and 112:
MC75 AT Command Set 5.3 AT^SPIC s a
Page 113 and 114:
MC75 AT Command Set 5.4 AT+CLCK s
Page 115 and 116:
MC75 AT Command Set 5.4 AT+CLCK s 6
Page 117 and 118:
MC75 AT Command Set 5.5 AT^SLCK s 5
Page 119 and 120:
MC75 AT Command Set 5.6 AT+CPWD s
Page 121 and 122:
MC75 AT Command Set 5.6 AT+CPWD s E
Page 123 and 124:
MC75 AT Command Set 5.7 AT^SPWD s P
Page 125 and 126:
MC75 AT Command Set 5.8 AT^SCSL s
Page 127 and 128:
MC75 AT Command Set 5.8 AT^SCSL s A
Page 129 and 130:
MC75 AT Command Set 6.2 AT+CGMI s 6
Page 131 and 132:
MC75 AT Command Set 6.6 AT+CGMR s 6
Page 133 and 134:
MC75 AT Command Set 6.10 AT+CIMI s
Page 135 and 136:
MC75 AT Command Set 7.2 ATA s 7.2 A
Page 137 and 138:
MC75 AT Command Set 7.3 ATD s (str
Page 139 and 140:
MC75 AT Command Set 7.4 ATD> s Note
Page 141 and 142:
MC75 AT Command Set 7.6 ATD> s 7.6
Page 143 and 144:
MC75 AT Command Set 7.8 ATDL s 7.8
Page 145 and 146:
MC75 AT Command Set 7.10 AT+CHUP s
Page 147 and 148:
MC75 AT Command Set 7.11 AT^SHUP s
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
MC75 AT Command Set 7.17 ATO s 7.17
Page 155 and 156:
MC75 AT Command Set 7.19 AT+CBST s
Page 157 and 158:
MC75 AT Command Set 7.20 AT+CRLP s
Page 159 and 160:
MC75 AT Command Set 7.21 AT+CLCC s
Page 161 and 162:
MC75 AT Command Set 7.22 AT^SLCC s
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
MC75 AT Command Set 7.24 AT+CRC s 7
Page 169 and 170:
MC75 AT Command Set 7.26 AT^SCNI s
Page 171 and 172:
MC75 AT Command Set 7.28 AT^STCD s
Page 173 and 174:
MC75 AT Command Set 8. Network Serv
Page 175 and 176:
MC75 AT Command Set 8.2 AT+COPS s R
Page 177 and 178:
MC75 AT Command Set 8.3 AT^SOPS s
Page 179 and 180:
MC75 AT Command Set 8.4 AT+CREG s
Page 181 and 182:
MC75 AT Command Set 8.5 AT+CSQ s 8.
Page 183 and 184:
MC75 AT Command Set 8.6 AT^SMONC s
Page 185 and 186:
MC75 AT Command Set 8.7 AT^SMOND s
Page 187 and 188:
MC75 AT Command Set 8.8 AT^MONI s 8
Page 189 and 190:
MC75 AT Command Set 8.8 AT^MONI s C
Page 191 and 192:
MC75 AT Command Set 8.9 AT^MONP s 8
Page 193 and 194:
MC75 AT Command Set 8.10 AT^SMONG s
Page 195 and 196:
MC75 AT Command Set 8.11 AT^SALS s
Page 197 and 198:
MC75 AT Command Set 8.13 AT^SPLM s
Page 199 and 200:
MC75 AT Command Set 8.15 AT^SPLR s
Page 201 and 202:
MC75 AT Command Set 9. Supplementar
Page 203 and 204:
MC75 AT Command Set 9.2 AT^SACM s
Page 205 and 206:
MC75 AT Command Set 9.4 AT+CAOC s 9
Page 207 and 208:
MC75 AT Command Set 9.5 AT+CCUG s
Page 209 and 210:
MC75 AT Command Set 9.6 AT+CCFC s
Page 211 and 212:
MC75 AT Command Set 9.6 AT+CCFC s
Page 213 and 214:
MC75 AT Command Set 9.7 AT+CCWA s P
Page 215 and 216:
MC75 AT Command Set 9.7 AT+CCWA s E
Page 217 and 218:
MC75 AT Command Set 9.8 AT+CHLD s N
Page 219 and 220:
MC75 AT Command Set 9.9 AT+CLIP s P
Page 221 and 222:
MC75 AT Command Set 9.11 AT+COLP s
Page 223 and 224:
MC75 AT Command Set 9.12 AT+CPUC s
Page 225 and 226:
MC75 AT Command Set 9.13 AT+CSSN s
Page 227 and 228:
MC75 AT Command Set 9.14 AT+CUSD s
Page 229 and 230:
MC75 AT Command Set 10. Internet Se
Page 231 and 232:
MC75 AT Command Set 10.1 AT^SICS s
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
MC75 AT Command Set 10.2 AT^SISS s
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
MC75 AT Command Set 10.3 AT^SISO s
Page 251 and 252:
MC75 AT Command Set 10.3 AT^SISO s
Page 253 and 254:
MC75 AT Command Set 10.4 AT^SISC s
Page 255 and 256:
MC75 AT Command Set 10.5 AT^SISR s
Page 257 and 258:
MC75 AT Command Set 10.5 AT^SISR s
Page 259 and 260:
MC75 AT Command Set 10.6 AT^SISW s
Page 261 and 262:
MC75 AT Command Set 10.7 Informatio
Page 263 and 264: MC75 AT Command Set 11. GPRS Comman
Page 265 and 266: MC75 AT Command Set 11.2 AT+CGANS s
Page 267 and 268: MC75 AT Command Set 11.3 AT+CGATT s
Page 269 and 270: MC75 AT Command Set 11.4 AT+CGAUTO
Page 271 and 272: MC75 AT Command Set 11.5 AT+CGDATA
Page 273 and 274: MC75 AT Command Set 11.6 AT+CGDCONT
Page 275 and 276: MC75 AT Command Set 11.7 AT+CGEQMIN
Page 277 and 278: MC75 AT Command Set 11.7 AT+CGEQMIN
Page 279 and 280: MC75 AT Command Set 11.8 AT+CGEQREQ
Page 281 and 282: MC75 AT Command Set 11.8 AT+CGEQREQ
Page 283 and 284: MC75 AT Command Set 11.10 AT+CGQMIN
Page 285 and 286: MC75 AT Command Set 11.10 AT+CGQMIN
Page 287 and 288: MC75 AT Command Set 11.11 AT+CGQREQ
Page 289 and 290: MC75 AT Command Set 11.11 AT+CGQREQ
Page 291 and 292: MC75 AT Command Set 11.12 AT+CGREG
Page 293 and 294: MC75 AT Command Set 11.13 AT+CGSMS
Page 295 and 296: MC75 AT Command Set 11.14 AT^SGACT
Page 297 and 298: MC75 AT Command Set 11.16 AT^SGCONF
Page 299 and 300: MC75 AT Command Set 11.17 ATA s 11.
Page 301 and 302: MC75 AT Command Set 11.19 ATD*98# s
Page 303 and 304: MC75 AT Command Set 11.21 ATS0 s 11
Page 305 and 306: MC75 AT Command Set 11.22 Using GPR
Page 307 and 308: MC75 AT Command Set 12. FAX Command
Page 309 and 310: MC75 AT Command Set 12.3 AT+FRH s 1
Page 311 and 312: MC75 AT Command Set 12.5 AT+FRS s 1
Page 313: MC75 AT Command Set 12.7 AT+FTM s 1
Page 317 and 318: MC75 AT Command Set 13.1 SMS parame
Page 319 and 320: MC75 AT Command Set 13.1 SMS parame
Page 321 and 322: MC75 AT Command Set 13.3 AT+CMGD s
Page 323 and 324: MC75 AT Command Set 13.5 AT+CMGL s
Page 325 and 326: MC75 AT Command Set 13.6 AT+CMGR s
Page 327 and 328: MC75 AT Command Set 13.7 AT+CMGS s
Page 329 and 330: MC75 AT Command Set 13.8 AT+CMGW s
Page 331 and 332: MC75 AT Command Set 13.9 AT+CMSS s
Page 333 and 334: MC75 AT Command Set 13.11 AT+CNMI s
Page 335 and 336: MC75 AT Command Set 13.11 AT+CNMI s
Page 337 and 338: MC75 AT Command Set 13.12 AT+CPMS s
Page 339 and 340: MC75 AT Command Set 13.14 AT+CSCB s
Page 341 and 342: MC75 AT Command Set 13.16 AT+CSMP s
Page 343 and 344: MC75 AT Command Set 13.17 AT+CSMS s
Page 345 and 346: MC75 AT Command Set 13.18 AT^SCML s
Page 347 and 348: MC75 AT Command Set 13.20 AT^SCMS s
Page 349 and 350: MC75 AT Command Set 13.22 AT^SLMS s
Page 351 and 352: MC75 AT Command Set 13.24 AT^SMGO s
Page 353 and 354: MC75 AT Command Set 13.25 AT^SMGR s
Page 355 and 356: MC75 AT Command Set 13.27 AT^SSDA s
Page 357 and 358: MC75 AT Command Set 14. SIM related
Page 359 and 360: MC75 AT Command Set 14.1 AT+CRSM s
Page 361 and 362: MC75 AT Command Set 14.2 AT^SXSM s
Page 363 and 364: MC75 AT Command Set 14.3 AT^SCKS s
Page 365 and 366:
MC75 AT Command Set 14.5 AT^SCID s
Page 367 and 368:
MC75 AT Command Set 15. SIM Applica
Page 369 and 370:
MC75 AT Command Set 15.2 ^SSTN s 15
Page 371 and 372:
MC75 AT Command Set 15.4 AT^SSTR s
Page 373 and 374:
MC75 AT Command Set 16.2 AT+CNUM s
Page 375 and 376:
MC75 AT Command Set 16.3 AT+CPBR s
Page 377 and 378:
MC75 AT Command Set 16.4 AT+CPBS s
Page 379 and 380:
MC75 AT Command Set 16.5 AT+CPBW s
Page 381 and 382:
MC75 AT Command Set 16.5 AT+CPBW s
Page 383 and 384:
MC75 AT Command Set 16.7 AT^SPBC s
Page 385 and 386:
MC75 AT Command Set 16.9 AT^SPBG s
Page 387 and 388:
MC75 AT Command Set 16.9 AT^SPBG s
Page 389 and 390:
MC75 AT Command Set 16.10 AT^SPBS s
Page 391 and 392:
MC75 AT Command Set 16.10 AT^SPBS s
Page 393 and 394:
MC75 AT Command Set 17.2 ATL s 17.2
Page 395 and 396:
MC75 AT Command Set 17.5 AT+CMUT s
Page 397 and 398:
MC75 AT Command Set 17.7 AT+VTS s 1
Page 399 and 400:
MC75 AT Command Set 17.8 AT^SAIC s
Page 401 and 402:
MC75 AT Command Set 17.9 AT^SNFA s
Page 403 and 404:
MC75 AT Command Set 17.11 AT^SNFI s
Page 405 and 406:
MC75 AT Command Set 17.12 AT^SNFM s
Page 407 and 408:
MC75 AT Command Set 17.13 AT^SNFO s
Page 409 and 410:
MC75 AT Command Set 17.15 AT^SNFS s
Page 411 and 412:
MC75 AT Command Set 17.15 AT^SNFS s
Page 413 and 414:
MC75 AT Command Set 17.17 AT^SNFV s
Page 415 and 416:
MC75 AT Command Set 17.19 AT^SRTC s
Page 417 and 418:
MC75 AT Command Set 18. Hardware re
Page 419 and 420:
MC75 AT Command Set 18.2 AT+CALA s
Page 421 and 422:
MC75 AT Command Set 18.3 AT^SBC s 1
Page 423 and 424:
MC75 AT Command Set 18.3 AT^SBC s N
Page 425 and 426:
MC75 AT Command Set 18.5 AT^SCTM s
Page 427 and 428:
MC75 AT Command Set 18.5 AT^SCTM s
Page 429 and 430:
MC75 AT Command Set 18.6 AT^SSYNC s
Page 431 and 432:
MC75 AT Command Set 18.7 AT^SSPI s
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
MC75 AT Command Set 19.2 ATS3 s 19.
Page 441 and 442:
MC75 AT Command Set 19.4 ATS5 s 19.
Page 443 and 444:
MC75 AT Command Set 20. Appendix s
Page 445 and 446:
MC75 AT Command Set 20.2 Star-Hash
Page 447 and 448:
MC75 AT Command Set 20.3 Available
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
MC75 AT Command Set 20.4 Availabili
Page 457 and 458:
Page 459 and 460:
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
MC75 AT Command Set 20.6 Factory De
Page 467 and 468:
MC75 AT Command Set 20.7 Summary of
Page 469 and 470:
Page 471 and 472:
MC75 AT Command Set 20.9 Alphabetic
Page 473 and 474:
Page 475:
show all

MC75 AT Command Set

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?