Untitled - Innova

Using the Scan Tool
VIEWING ENHANCED DTCs
Honda/Acura Enhanced DTCs
When the Scan Tool enters the “enhanced”
mode (and Honda/Acura is selected, if
prompted), the Honda Acura Enhanced menu
displays. Depending on the protocol used to
communicate with your vehicle, the
Honda/Acura Enhanced menu provides
options to view:
• Confirmed DTCs or Temporary DTCs
• Confirmed DTCs or Pending DTCs
1. Use the UP and DOWN buttons,
as necessary, to highlight the desired
option, then press the ENTER button.
• A “One moment please” message
displays while the Scan Tool
retrieves the selected DTCs.
• If the Scan Tool fails to link to the
vehicle’s computer, a “Linking
Failed” message shows on the Scan
Tool’s display.
- Verify the ignition is ON, then
press the ENTER button to
continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 8 for a description of
LCD display elements.
• A visible icon indicates that the Scan Tool is being powered
through the vehicle’s DLC connector.
• The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
• The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, or when viewing
Freeze Frame data, a small arrow is shown in the
upper/lower right-hand corner of the code display area
to indicate the presence of additional information. Use
the and buttons, as necessary, to view the
additional information.
46 OBD2