Untitled - Innova

Live Data Mode
RECORDING (CAPTURING) LIVE DATA
1. While linked to the vehicle, start the
engine, then press and release the
LD/M button.
• The “Mode Selection Menu” displays.
2. Use the UP and DOWN buttons,
as necessary, to highlight Live Data,
then press the ENTER button.
• The “Live Data” menu displays.
3. Use the UP and DOWN buttons,
as necessary, to highlight “Custom Live
Data”, then press the ENTER button.
• The "Custom Live Data" menu
displays, with the first PID in the
menu highlighted.
4. Use the UP and DOWN buttons
to scroll through the available PIDs.
When the PID you wish to display is
highlighted, press the ENTER button
to select it (a "checkmark" will show in
the checkbox to the right of the PID to
confirm your selection). Repeat the
procedure until only the PIDs you want
to display have all been selected.
• To deselect a currently selected PID, highlight the PID, then
press the ENTER button. The checkmark will be removed
from the checkbox.
5. When you are finished making your selection(s), scroll to the end of
the PID list and highlight the word DONE, then press the ENTER
button.
• The Scan Tool is now in "Custom Live Data" mode. Only the
PIDs you selected are shown on the Scan Tools display.
• To toggle between the "Custom Live Data" display and the full
Live Data display, momentarily press the LD/M button.
6. To exit the "Custom Live Data" mode, press and hold the LD/M
button until the “System Test Menu” displays.
RECORDING (CAPTURING) LIVE DATA
You can record and save several frames of Live Data information for
each PID supported by the vehicle in the Scan Tool's memory.
Recorded Live Data can serve as valuable information to help you in the
troubleshooting of vehicle problems.
OBD2 63