mitsubishi - Al Kossow's Bitsavers

MITSUBISHI MICROCOMPUTERSPC9001CPMCP/M SOFTWARE FOR PC9000SPECIFICATIONItemSpecificationCP/M Version Version 2.2RAM siLeConsole (CON)Paper tape reader (RDR:)Paper tape punch (PUN:)List device (LST:)48K bytesBuilt·in CRT device and keyboard of the PC9000Built·in ME LCOM 70 interface of the PC9000(Hand shaking operation using a data terminal ready. DTR)Built·in PC4000 interface of the PC9000(Hand shaking operation using a data set ready. DSR)Centronics external printer (LPT:) Built·in miniprinter of the PC9000 (U L1:) LPT = standard assignFloppy disk storage 2 x 320K bytes (A: and B)Key board• Capital/small letter selection by [E] keyPROM programmer • File load, file save, edit. PROM program, PROM read, verify, padding, block moving• 8K bytes work area• Target ROM (2708/2716/2732)Miscellaneous • Time-out detector for printer ready• Automatical warm boot operation by a key input when a programming is begun.in the write protected disk• Automatically effected DTR output of the ME LCOM 70 interface by a warm bootAPPLICATION SOFTWARE LIST IN THE PC9001CPMProgram Function SupplementEDIT Screen Edi tor PC9000 original editorED*Line EditorASM* Assembler for 8080LOAD*Modification of execution styleDDT* Debugger for 8080PROM Programming control The program to transfer an assemble result to a PROM by a built-in PROM programmer of PC9000. (Functionsfor 2708/16/32of padding and block transfer are progra~med.)DUMP* Hex Dump Source program is attachedIIPIP*STAT *SUBMIT*XSUB*File handlingSystem status indicatorSubmit fi18' managementOptional SUBMITCMNA 1 ME LCOM 70 communication The communication of object codes by the ME LCOM 70 in the Intel HE X formatCMNA 2 PC4000 communication The communication of object codes by the PC4000 in the Intel HEX formatGeneral purpose fi IeMSScommunicationThe communication of file data with another CP/M machineDISKCOPY Copy of disk contents Copy the disk contents from A to BDDBI Disk initialize Initialization of PC9000 formatting for a disk in the marketThe program marked with * is the utility progra~ for CP/M.• MITSUBISHI"ELECTRIC7-15