Operator's Manual-AVEA - Static Content

Service Manual 107
Chapter 11 Repackaging Instructions
General
The packaging system for the BEAR CUB 750vs Infant Ventilator has been
designed to provide a high degree of protection against shipping damage.
All shipments of BEAR CUB 750vs Infant Ventilators should be made using the
complete packaging system.
Allied Healthcare Products, Inc., does not assume any liability whatsoever for any
damage incurred in any product returned to our facilities by any means. The shipper
and carrier are totally responsible for all damage and costs involved in transporting
returned goods. If a package is damaged in shipment, your shipper and/or carrier
should be notified within ten days of receipt of the shipment.
Packaging Instructions
NOTE
It is advisable that a shipping department or organization perform this procedure. A
local freight company will usually pack the product at your facility for a small service
charge.
The packaging carton consists of:
Accessory Carton 51000-09505
Anti-static Bag 26"x22"x44" 51000-06056
Cavity pack-bottom 51-09504-02
Cavity pack-top 51-09504-01
Shipping Carton 51000-09502
Shipping Label 51000-20038
Procedure
1. Place a large plastic bag over the ventilator.
2. Attach a shipper to the plastic bag with tape.
3. Place the accessory carton inside the shipping carton.
4. Align the bottom portion of cavity-pack so it slides in place inside the carton.
5. Place the ventilator in the carton, align the ventilator so it slides into the
cavity-pack bottom.
6. Align the top portion of the cavity-pack on top of the ventilator.
7. Seal the box top flaps with heavy duty packaging tape.
L2342 Revision B November 2004