TouchWare for Windows User's Guide - Touch Screens Inc.

Appendix A Multiple Serial Touchscreens 753. Use the tabs in the MicroTouch Touchscreen Properties dialog box to calibrateand configure the touchscreen. For more information on the configurationsettings, refer to the chapter 2 of this guide or the online help.For the most part, touchscreen properties apply to individual touchscreens. Theonly exceptions to this are the double-click and cursor visibility settings, whichare applied globally.Note: Multiple touchscreens default to a single touch mode called Click. TheTouch Mode selection buttons on the MicroTouch Touchscreen Properties dialogbox are disabled. Click mode provides button operation only. The touchscreensends a button-down, followed by a button-up to the operating system. No drawingor dragging is supported in multiple monitor installations. Use the AdvancedTouchscreen Settings dialog to enable additional touch modes.4. Repeat steps 1-3 for each touchscreen connected to your system.