Programming Manual

LNC-MILLG102 Circular Mode of Multi-hole Manufacturing CycleG102 Circular Mode of Multi-hole Manufacturing CycleCommand FormatG102 A__ B__ C__ F__ K__ M__ Q__ R__ S__T__ V__ X__ Y__ Z__;Argument Instruction• A__Angle between manufacturing axis and +X-axis.• B__Radius of manufacturing circumference (mm)• C__Number of holes being manufactured.• F__Manufacturing feedrate (mm/min).• K__Manufacturing repetition times (argument M be 1~4);In tapping mode (argument M be 5), it’s for assigning left-handed orright-handed screw thread tapping, 0 denotes right-handed thread tapping,and 1 denotes left-handed thread tapping.• M__Cutting Mode1 : G73 high speed peck drilling cycle;2 : G83 peck drilling cycle;3 : G85 reaming cycle;4 : G89 reaming cycle;170 LNC Technology Co., Ltd.