Programming Manual

LNC-MILLG104 Grid Mode of Multi-hole Manufacturing CycleG104 Grid Mode of Multi-hole Manufacturing CycleCommand FormatG104 A__ B__ C__ D__ E__ F__ K__ M__ Q__ R__S__ T__ U__ V__ X__ Y__ Z__;Argument Instruction• A__Column distance of hole alignment (mm).• B__Row distance of hole alignment (mm).• C__Numbers of hole being manufactured per column.• D__Numbers of row being manufactured.• E__Angle between manufacturing axis and +X-axis.• F__Manufacturing feedrate (mm/min).• K__Numbers of manufacturing repetition (argument M be 1~4);In tapping mode (argument M be 5), it’s for assigning left-handed orright-handed screw thread tapping, 0 denotes right-handed thread tapping,and 1 denotes left-handed thread tapping• M__Cutting Mode1 : G73 high speed peck drilling cycle;184 LNC Technology Co., Ltd.