Programming Manual

LNC-MILLG61, G64 Exact Positioning Mode, General Cutting ModeG61, G64 Exact Positioning Mode, General Cutting ModeCommand FormatG61;G64;Argument Instruction• G61Exact positioning mode• G61General cutting mode.Action InstructionThe function of G61 is the same as that of G09, but the effectiveness of G09 islimited to one block, and the effectiveness of G61 is valid still after a declaration,until G64 (general cutting) is declared. G64 is the default mode of the system,and the G64 mode stays effective unless G61 is declared.For cutting commands (G01/G02/G03), the positioning precision of each axis canbe set by using parameters #0006~0009, 0252~0253; For rapid positioning (G00),the positioning precision of each axis is set by using parameters #0800~0830,0268~0269. Furthermore, the activation for the correct positioning function ofeach axis can be enabled or disabled by using parameter #0043.IllustrationTool path under G61 modeTool path under G64 modeProgram SampleG61 G91 G01 Y100. F200.; ----------------------------------------------------------- (Correct positioning)X100.; --------------------------------------------------------------------------------------- (Correct positioning)G64; -------------------------------------------------------------------- (Cancellation of Correct positioning)46 LNC Technology Co., Ltd.