Programming Manual

LNC-MILLG105 Promiscuous Mode of Multi-hole Manufacturing Cycle• Q__Depth of feed per time (mm) ( argument M be 1~4);In tapping mode (argument M be 5), it’s for assigning Metric thread (M, MF) orBritish thread (BSW, BSF), 0 denotes Metric, and 1 denotes British.• R__Manufacturing cycle return R point (mm).• S__Spindle speed (RPM).• T__Dwell time at hole bottom (1/1000 sec), minimum unit, decimal numbers arenot allowed.• U__Alignment types of manufactured holes. (0: rectangle; 1: grid).• V__Retrace amount per manufacturing (mm)(argument M be 1~4);In tapping mode (argument M be 5), it’s for assigning the pitch.• X__Coordinate of first hole of X-axis (mm).• Y__Coordinate of first hole of Y-axis (mm).• Z__Coordinate of hole bottom (mm).LNC Technology Co., Ltd. 193