Programming Manual

LNC-MILLG41, G42 Tool Radius CompensationG41, G42 Tool Radius CompensationCommand Format⎡ G17⎤⎢ G41G18⎥ ⎡ ⎤⎢ ⎥ ⎢ D__;G42⎥⎢G19⎥⎣ ⎦⎣ ⎦G40;Argument Instruction• G40Tool radius compensation cancel.• G41Tool radius compensation left.• G42Tool radius compensation right.• D__Tool Compensation times. Setting range: 1~30Action InstructionThe single block for the start and the cancellation of tool Compensation must be alinear command (G00 or G01), circular/helical command (G02 or G03) is notallowed.The type of Tool Compensation could be Type A and Type B, which could be setby parameter #0131.LNC Technology Co., Ltd. 33