Programming Manual

LNC-MILLG65 Simple CallIn G65 blocks, G65 must be written before all arguments. The nest type call can be done towardsG65, and up to four levels are available for the combination of G65 and G66 (The main program isnot included, and the main program is level 0), and each level has its own local variables as shownbelow :MainProgramMacroProgramMacroProgramMacroProgramMacroProgram(Level 0)(Level 1)(Level 2)(Level 3)(Level 4)O0001;O0002;O0003;O0004;O0005;....#1=2.0.. #1=3.0 ..#1=4.0.. #1=5.0..........#1=1;........G65 P0002 A2.0;G65 P0003 A3.0;G65 P0004 A4.0;G65 P0005 A5.0;......................M30;M99;M99;M99;M99;LocalVariablesLocalVariablesLocalVariablesLocalVariablesLocalVariables(Level 0)(Level 1)(Level 2)(Level 3)(Level 4)#11 #1 2 #1 3 #1 4 #1 5........................................#33#33#33#33#33LNC Technology Co., Ltd. 49