IronPort - daily management guide - AsyncOS 7.6.1

Chapter 4 Quarantines
OL-25138-01
Configuring the Cisco IronPort Spam Quarantines Feature
Enabling and Disabling the Local Cisco IronPort Spam Quarantine
Enabling the local Cisco IronPort Spam quarantine causes AsyncOS to use the local Cisco IronPort
Spam quarantine, even if you have an external Cisco IronPort Spam quarantine configured.
To enable the local Cisco IronPort Spam quarantine:
Step 1 On the Monitor > Quarantines page, click Enable.
Figure 4-13 Enabling the Local Cisco IronPort Spam Quarantine
Step 2 The Cisco IronPort Spam Quarantine is enabled. If the Cisco IronPort Spam Quarantine is not
configured, the Edit IronPort Spam Quarantine page is displayed (see Configuring the Local Cisco
IronPort Spam Quarantine, page 4-22).
Step 3 Submit and commit your changes.
Disabling the Local Cisco IronPort Spam Quarantine
To disable the local Cisco IronPort Spam quarantine (not available on the M-Series appliance):
Step 1 On the Monitor > Quarantines page, click Edit in the Settings column for the Cisco IronPort Spam
Quarantine.
Step 2 In the Spam Quarantine Settings section, uncheck Enable IronPort Spam Quarantine.
Step 3 Submit and commit your changes.
If messages are present in the local Cisco IronPort Spam quarantine when it is disabled, you can opt to
delete all of the messages via the “Delete All” link on the Quarantines page:
Cisco IronPort AsyncOS 7.6 for Email Daily Management Guide
4-19