E - VAE ProSys sro

6.4.2 Static control wordNew value, first value, priorityParameterizing of fault bit processing (see chapter: Fault bit processing)Fault listLine-by-line output of the faults (see chapter "Fault bit processing")Variables in dynamic fault messages (only graphic terminals)Processing of variables in dynamic fault messages (see chapter: "Fault bit processing in the PLC-Mode").RotationRotation of the current faults in a cycle of 2 seconds (see chapter "Fault bit processing in the PLC-Mode").Print without headerPrinting without a header at the beginning of the page and switching of messages and histogram.Display brightnessThe brightness can be set by setting both bits with all devices having an florescent display (with MT-40 from serialnumber 62102 onwards)The brightness of the background lighting of the MT-121 is controlled by the optical sensor/ not into basic maskSetting these bits disables the jump to the basic mask using or . Changeover is only possible bymeans of a function key or via the PLC.Edit disableBy setting this bit, all edit fields become pure display fields. The cursor is switched off.E110Process display and control/ Device Manual/ Issue: 07.01