E - VAE ProSys sro

7.7.2 Calling up the historyThe history can be activated either via a function key or via a message text from the code sequence #H.Example:1. Call via function key textF9 -F10 - #HF11 -2. or via message textOn─Line─Display MT-121Text number: 400 ┌0|1──────1|0───────2|0───────3|0───────4|0┐││││History└4|1──────5|0───────6|0───────7|0───────8|0┘Text: 0|1 1|0 2|0 3|0 4|0 5|0#H5|1 6|0 7|0 8|0 9|0 10|0This message text number (400) now has to be entered into the message register, to call the history menu.7.7.3 History basic menu of MT-45/ MT-91/ MT-121After the history has been called up, the last message entered will be shown at the top.From this basic menu, the keys and provide the navigation through the history. The key serves to move to older entries, the key in the direction of the latest entries. The key combination changes the direction: the older messages are then displayed first. The keys and now alsowork in the opposite way: shows a sequence of the older entries.The upper right hand corner of the display indicates the actual position and the number of entries in the history.The actual position in the history is always shown as the first message ("motor 4 at …).Press the key to leave the history.HISTORY 006/040MOTOR 4 AT 23:40:30 EMERGENCY STOPPED !HEATING PLANT 2 ONLIGHTING HALL 7 OFF___________________________________________-SCROLL-ESCAPE -START -ENDProcess display and control/ Device Manual/ Issue: 07.01143E