E - VAE ProSys sro

Format Descriptionmax. position Value rangeParametersident.numberN Signed numerical 5+sign -32768...32767Example: Value in PLC Format string DisplayMD 0210 1234=04D2h #0210NNNNN 01234MD 0210 1234=04D2h #0210NN.NNN 01.234MD 0210 -1234=FB2Eh #0210NNNNN -1234U Unsigned numerical 5 0...65535Example: Value in PLC Format string DisplayMD 0210 1234=04D2h #0210UUUU 1234MD 0210 1234=04D2h #0210UUUUU 01234MD 0210 1234=04D2h #0210UU.UU 12.34X Hexadecimal 4 0000...FFFFhExample: Value in PLC Format string DisplayMD 0210 0004h #0210X 4MD 0210 00F4 #0210XX F4MD 0210 04D2h #0210XXXX 04D2T Indirect text 1 1...max. Text numberExample: Value in PLC Format string DisplayMD 021050 #0210T(7 spaces) AUTOText 50 = "AUTO "MD 021051 #0210T(7 spaces) HANDText 51 = "HAND "MD 0210Text 52 = "SERVICE"52 #0210T(7 spaces) SERVICE• One format character for one position to be displayed.• Signed formats, i.e. N and D must have a format character for the sign.• In the format statements B, N, D and U the point "." is used as delimiter.• If the value in the PLC oversteps the display range, stars * are superimposed.Specially for the T format:• The value read from the memory word is interpreted as text number and the corresponding text is overlaid• In this text no control sequences are processed.• When overlaying texts of different length, they must be modified to one length.Example:Text 51: "HAND", text 52 "SERVICE"Exchanges of the value of 52 on 51 "HANDICE"Remedy: text 51 = "HAND " (extending with text end character))E116Process display and control/ Device Manual/ Issue: 07.01