E - VAE ProSys sro

6.10.1 Global Parameterizing of representation and sortingParameterizing in control word ("Address control words"/ "LED-Bit field") + 3+03 Bit15Bit14Bit13Bit12Bit11Bit10Bit9Bit8Bit7Bit6Bit5Bit4Bit3Bit2Bit1Bit0Meaningx x x x x x x x x x x x x x 0 0 New valuex x x x x x x x x x x x x x 0 1 First valuex x x x x x x x x x x x x x 1 0 Priority1. New valueSorting of the latest fault as fault head, i.e. the latest fault is displayed in the fault menu, the older faults arelocated behind it.2. First valueAppending the latest fault at the end of the fault buffer, i.e. the first fault is the first entry in the fault messagebuffer, newer ones are located behind it.3. PrioritySorting according to the decreasing text number, i.e. always the smallest text number of the current faultsstands for the first entry in the fault message buffer.6.10.2 Variables in dynamic faults (MT-45, MT-91, MT-121)Parameterizing in control word ("Address control words"/ "LED-Bit field") + 3+03 Bit15Bit14Bit13Bit12Bit11Bit10Bit9Bit8Bit7Bit6Bit5Bit4Bit3Bit2Bit1Bit0Meaningx x x x x x x x x x x x x 0 x x Variables in dyn. faultsstatic*x x x x x x x x x x x x x 1 x x Variables in dyn. faultsdynamic** This bit is relevant only if in the configuration menu "Handling of the fault list" is selected "Selection via PLC".In this case:• If the bit is 0 then the variables in dynamic faults are not refreshed.• If the bit is 1 then the variables are refreshed cyclically.6.10.3 Fault list / Rotation+03 Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Bit Meaning15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0x x x x x x x x x x x x x 1 x x Fault list(only text terminals)x x x x x x x x x x x x 1 x x x RotationIf there are a number of faults these can be displayed rotating automatically in a 2 second tact.Process display and control/ Device Manual/ Issue: 07.01121E