E - VAE ProSys sro

7.7.9 Exiting the historyThe function "END" exits the history. The following mask appears:NODELETE HISTORY BUFFER?YESAt this point, the user has the choice of deleting ("YES") or keeping ("NO") the contents of the history buffer.7.7.10 Deleting the historyThe history can be deleted only after the input of a five digit password. The password mask appears:ENTER PASSWORD : 00000EXIT + - OKAt this stage, the correct password must be entered. With the character is acknowledged; with theinput can be aborted.Letters and numbers of the selected character set can be used as password characters. When the last character isacknowledged the password is checked.If the password was correct the password can be changed:CHANGE PASSWORD?GO ONYESWith the function "YES" the password mask appears in which the new password can be entered. If the passwordshall remain unchanged "GO ON" must be selected.If the entered password does not correspond with the current password the following mask appears:!!! PASSWORT INVALID !!!GO ONAgain the input of the password is demanded.The calculated reset of the passwords is possible by operating the key combination +simultaneously after the restarting the device. The character string '00000' is loaded as default value.Process display and control/ Device Manual/ Issue: 07.01147E