S - Kam Ng PhD Dissertation Final.pdf - Digital Repository of CCEE ...

113Theory to Piles, Petaling Jaya, Selangor, Malaysia, August, pp. 153 – 165.Likins, G., Rausche, F., Thendean, G., and Svinkin, M. (1996). ―CAPWAP CorrelationStudies.‖ Proceedings of the 5 th International Conference on the Application ofStresswave Theory to Piles. University of Florida, Orlando, FL.Liu, C., Lin, Q., and Shi, F. (1996). ―Determining the Bearing Capacity of Large-DiameterBored Cast-In-Situ Piles by High Strain Dynamic Pile Testing.‖ Proceedings of the5 th International Conference on the Application of Stress-Wave Theory to Piles,Orlando, University of Florida, pp.409-419.Lo, S. R., Li, K. S., and Lam J. (2008). ―Driven High Capacity H-Piles in Hong KongSaprolites: A Reliability Evaluation of Two Methods.‖ Canada Geotechnical Journal,Vol. 45, pp. 124-130.Long, J. H., Kerrigan, J. A., and Wysockey, M. H. (1999). ―Measured Time Effects for AxialCapacity of Driving Piling.‖ Transportation Research Record 1663, Paper No. 99-1183, Transportation Research Board, Washington, D.C., pp. 8-15.Long, J. H., Maniaci, M. and Samara, E. A. (2002). ―Measured and Predicted Capacity of H-Piles.‖ Geotechnical Special Publication No.116, Deep Foundations, An InternationalPerspective on Theory, Design, Construction, and Performance, Vol. 1, Proceedingsof the International Deep Foundations, Congress 2002, 14-16 th February, Orlando,FL, ASCE, pp. 542-558.Mathias, Dean and Cribbs, Michelle (1998). Driven 1.0: A Microsoft Windows TM BasedProgram for Determining Ultimate Vertical Static Pile Capacity. Publication No.FHWA-SA-98-074, National Highway Institute, Federal Highway Administration,U.S. Department of Transportation, Washington, D.C.McVay, M., Birgisson, B., Zhang, L., Perez., A, and Putcha, S. (2000). ―Load andResistance Factor Design (LRFD) for Driven Piles Using Dynamic Methods – AFlorida Perspective.‖ Geotechnical Testing Journal, Vol. 23, No.1, pp. 55-66.Meyerhof, G. G. (1976). ―Bearing Capacity and Settlement of Pile Foundations.‖ Journal ofGeotechnical Engineering Division, ASCE, Vol. 102, No. GT3, Proc. Paper 11962,pp. 195-228.Morgano, C. M., and White, B. A. (2004). ―Identifying Soil Relaxation from Dynamic