S - Kam Ng PhD Dissertation Final.pdf - Digital Repository of CCEE ...

118Bearing Piles Embedded in Uniform and Stratified Soil. Ph.D. Thesis, CarnegieInstitute of Technology.Tomlinson, M. J. (1980). Foundation Design and Construction. 4 th Edition, PitmanAdvanced Publishing, Boston, MA.Transportation Research Board. (2009). Implementation Status of Geotechnical Load andResistance Factor Design in State Departments of Transportation. TransportationResearch Circular Number E-C136, June, Washington, D.C.Wathugala, G. W., and C. S. Desai. (1991). ―Hierarchical Single-Surface Model forAnisotropic Hardening Cohesive Soils.‖ Proceedings of 7 th International Conferenceof the International Association for Computer Methods and Advances inGeomechanics (J. Beer, J. R. Booker, and J. P. Carter, eds.), Cairns, Australia, pp.1249-1254.Webster, S. D. and Teferra, W. (1996). ―Pile Damage Assessments Using the Pile DrivingAnalyzer.‖ Fifth International Conference on the Application of Stress-Wave Theoryto Piles (STRESSWAVE 96): Orlando, FL, September, pp. 980-990.Wei, J., Heng, Y. S., Lok, C. S. and Chong, M. K. (1991). ―Dynamic Testing of H-Piles andHDB Sites.‖ Proceedings of the 4 th International Conference on Piling and DeepFoundations, Stresa, Italy, 7-12 th April, Vol. 1, pp. 665-671.Whittle, A. J., and Kavvadas, M. J. (1994). ―Formulation of MIT-E3 Constitutive Model forOverconsolidated Clays.‖ Journal of Geotechnical Engineering, ASCE, 120(1), pp.173-199.Whittle, A. J., and Sutabutr, T. (1999). ―Prediction of Pile Setup in Clay.‖ TransportationResearch Record 1663, Transportation Research Board, Washington, D.C., pp. 33-40.Widjaja, Budijanto. (2006). ―Wave Equation Analysis and Pile Driving Analyzer for DrivenPiles: 18 th Floor Office Building Jakarta Case.‖ International Civil EngineeringConference: Towards Sustainable Civil Engineering Practice, Surabaya, Indonesia,August 25-26, pp. 201-208.Yang, N. C. (1956). ―Redriving Characteristics of Piles.‖ Journal of the Soil Mechanics andFoundations Division, ASCE, Vol. 82, Paper 1026, SM3, July.Yang, L., and Liang, R. (2006). ―Incorporating Setup into Reliability-Based Design of