S - Kam Ng PhD Dissertation Final.pdf - Digital Repository of CCEE ...

114Testing.‖ Proceeding of the 7 th International Conference on the Application of StressWave Theory to Piles, Petaling Jaya, Selangor, Malaysia, August, pp.415-421.Ng, K. W., Suleiman, M. T., Sritharan, S., Roling, M., and AbdelSalam, S. S. (2011).Development of LRFD Design Procedures for Bridge Piles in Iowa – SoilInvestigation and Full-Scaled Pile Tests. Final Report Vol. II. IHRB Project No. TR-573. Institute of Transportation, Iowa State Univeristy, Ames, Iowa.Nordlund, R. L. (1963). ―Bearing Capacity of Piles in Cohesionless Soils.‖ ASCE, SM&FJournal SM-3.Nordlund, R. L. (1979). ―Point Bearing and Shaft Friction of Piles in Sand.‖ 5 th AnnualFundamentals of Deep Foundation Design, University of Missouri-Rolla.Nowak, A. (1999). NCHRP Report 368: Calibration of LRFD Bridge Design Code.Transportation Research Board, Washington, D.C.Paikowsky, S.G. with Contributions from Birgisson from Birgisson, B., McVay, M., Nguyen,T., Kuo, C., Baecher, G., Ayyab, B., Stenersen, K., O’Malley, K., Chernauskas, L.,and O’Neill, M. (2004). Load and Resistance Factor Design (LRFD) for DeepFoundations, NCHRP Report 507, Transportation Research Board, Washington, D.C.Paikowsky, S. G., Regan, J. E., and McDonnell, J. J. (1994). A Simplified Field Method forCapacity Evaluation of Driven Piles. Publication No. FHWA-RD-94-042. NationalHighway Institute, Federal Highway Administration, U.S. Department ofTransportation, Washington, D.C.Pei, J., and Wang, Y. (1986). ―Practical Experiences on Pile Dynamic Measurement inShanghai.‖ Proceedings of International Conference on Deep Foundations, Beijing,China, pp. 2.36-2.41.Perez, A.P. (1998). Load Resistance Factor Design (LRFD) for Driven Piles Based onDynamic Methods with Assessment of Skin and Tip Resistance from PDA Signals.MS. Thesis, University of Florida, FL.Pestana J. M., Hunt, C. E., and Bray, J. D. (2002). ―Soil Deformation and Excess PorePressure Field Around A Closed-Ended Pile.‖ Journal of Geotechnical andGeoenvironmental Engineering, ASCE, Vol. 128, No. 1, January 1, pp.1-12.Pile Driving Contractors Association (2007). Installation Specification for Driven Piles