General Index - National Roofing Contractors Association

Spray Polyurethane Foam-Based Systems; Protective Coatings -General InformationSWD 1. COMPANY NAME UCSC UCSC UCSCURETHANECOMPANY1929 H 2. PRODUCT NAME DURASIL DURASHIELD DURATHANE3A. COATING DESCRIPTIONX Acrylilc XButylHypalonNeopreneSiliconeXUrethaneXVinylModified AsphaltOther (type)NO 3B. VAPOR RETARDER (yes, perm rating 1.0) NO YES NOWHITE, GRAY, 3C. COLORS AVAILABLE GRAY, WHITE WHITE, TAN, DARK GRAYBUFFCUSTOM1929 H 4. BASE COATING (Name of Product) DURASIL DURASHIELD DURATHANESAME TOP COATING (Name of Product) DURASIL TOP DURASHIELD DURATHANE,DURASHIELD5. NUMBER OF COATING APPLICATIONS REQUIRED1 Base Coatings 1 – 2 2 21 Top Coatings 1 – 2 1 – 2 1OPTIONAL Granules Required (yes, no or optional) OPTIONAL OPTIONAL OPTIONAL6. REQUIRED DRY FILM THICKNESS: (mils)36 Base Coating 10 – 15 25 2412 Tom Coating 10 – 15 10 167. FILM CURE TIME24 HOURS Base Coating 4 HOURS 4 – 8 HOURS 12 – 16 HOURS24 HOURS Top Coating 24 HOURS 12 HOURS 72 HOURS1/4" 8. MINIMUM SLOPE REQUIRED (inches per foot) 1/8" 1/8" 1/8"9. REQUIREMENTS FOR USE OVER:(X=direct application permitted) (P=primer required)(T=thermal barrier required)P Concrete Decks P P PP Plywood Decks P P PP Metal Decks X X XP Existing Spudded Built-up Roofing X X XP Other Coatings P P PSELF 10. FLASHING MATERIAL (type or self-flashing) SELF SELF SELF11. APPLICATION CONDITIONS160Accelerated Weathering Per ASTM D 882 or Other (color change) NONE 10,000 HOURSHeat Aging Per ASTM D 573 or Other (%)Water Absorption Per ASMT D 570 or Other (%) >0.1 2.4YES 17. UL 790 FLAMMABILITY CLASS A RATING IN ANY SYSTEM (yes/no) YES YES YES18. FOAM INSULATION REQUIREMENTS1 Minimum Thickness (inches) 1 – 2 1 – 2 1 – 22.5 Nominal Density Per ASTM D 1622 or Other (lbs/ft 3 ) 2.5 2.5 2.540 Compressive Strength Per ASTM D 1621 or Other (psi) 40 40 4090 > 90 > 90YES 19. FOAM AVAILABLE FROM MANUFACTURER (yes/no) YES YES YES1972 20. YEAR OF FIRST COMMERCIAL USE 1981 1981 1981MILLIONS 21. NUMBER OF SQUARES INSTALLED (100 ft 2 )YES 22. MANUFACTURER-QUALIFIED APPLICATOR REQUIRED (yes/no) YES YES YESDISTRS, DIRECT 23. METHODS OF DISTRIBUTION (distributors and/or direct) DIRECT DIRECT DIRECT1 24. NUMBER OF REGIONAL SERVICE LOCATIONS 9 9 9R. WHIPPLE 25. FOR SALES INFORMATION, CONTACT: L. WRIGHT L. WRIGHT L. WRIGHT800/828–1394 800/289–8272 800/289–8272 800/289–8272R. WHIPPLE FOR TECHNICAL INFORMATION, CONTACT: L. WRIGHT L. WRIGHT L. WRIGHT800/828–1394 800/289–8272 800/289–8272 800/289–827226. SEE APPENDIX IF CHECKEDNA=not applicableBASE273