General Index - National Roofing Contractors Association

Metal Roof Panels1. COMPANY NAME FOLLANSBEE STEEL GALVAMET, INC.2. PRODUCT NAME TERNE II GALVALOK I3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) NO YESPANEL CONFIGURATION4A. Panel Description DOUBLE LOCK STANDING SEAM STANDING SEAM4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.)Stainless Steel (ga.)22, 24, 26 / BARE, MODIFIEDPOLYESTER, KYNAR 500Galvalume (ga.)Aluminized Steel (ga.)Aluminum (ga.)Copper (ga.)Terne Metal (ga.)28, 30 / ACRYLIC SHOP COATZinc (ga.)4C. MAXIMUM LENGTH (lf.) 35 454D. PANEL WIDTHS (in.) 17, 21 12, 18, 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 3:12 1/4:12Solid Decking (required, optional, or not used) REQUIRED OPTIONALUnderlayment (type or NA) ROSIN SIZED PAPER RIGID BOARD, ISO, FLEXIBLE FIBERGLASS6. PANEL PROFILEVertical LegXTrapezoidalBattenOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees)Roll Formed (180 degrees)Double Roll Formed (two 180 degrees) 1 / NRoll and LockSnap-on CapSnap Together 3 / F8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed Clip X XSlip ClipXMoveable Clip (designed allowable movement, inches) X 2-1/29. SPECIALTY APPLICATIONSCurvedXTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1998 1995Number of Squares InstalledLicensed Applicator Agreement (yes/no)NOMethod of Distribution (distributors, direct) DISTRIBUTORS DIRECTNumber of Regional Service Locations 22For Sales Information, Contact: J. BONAR J. GEORTNERFor Technical Information, Contact: E. THOMAS J. GEORTNER11. ASTM E331 WATER PENETRATION TEST RESULTS NONE NO LEAKAGE @ 4 PSF(results or none)X12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS NONE 0.043 CFM; 0.029 CFM;(results or none)0.022 CFM @ 4 PSF14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN NONE UL-9016. SEE APPENDIX IF CHECKEDNA=not applicable298