General Index - National Roofing Contractors Association

Metal Roof Panels1. COMPANY NAME ARS INDUSTRIES ARS INDUSTRIES2. PRODUCT NAME SSB SSC3. ARCHITECTURAL APPLICATIONS (yes/no) YES YESSTRUCTURAL APPLICATIONS (yes/no) YES NOPANEL CONFIGURATION4A. Panel Description LOCK FORM BATTEN SEAM SNAP-ON BATTEN4B. PANEL MATERIALS, THICKNESSES, AND FINISHES THICKNESSES / FINISHES THICKNESSES / FINISHESGalvanized Steel (ga.) 22, 24, 26 / KYNAR 500, SILICONE 22, 24 / KYNAR 500, SILICONEPOLYESTER, UNFINISHEDStainless Steel (ga.) 22, 24 26POLYESTER, UNFINISHEDGalvalume (ga.) 22, 24, 26 / KYNAR 500, SILICONE 24, 26 / KYNAR 500, SILICONEPOLYESTER, UNFINISHEDPOLYESTER, MILLAluminized Steel (ga.) 22, 24 24, 26Aluminum (ga.) 0.032, 0.040 / KYNAR 500, SILICONE 0.032 / KYNAR 500, SILICONEPOLYESTER, ANODIZEDPOLYESTER, ANODIZEDCopper (ga.) 16, 20 16,20Terne Metal (ga.) 24 24, 26Zinc (ga.) 24 24, 264C. MAXIMUM LENGTH (lf.) 60 604D. PANEL WIDTHS (in.) 8, 12, 16, 18, 20, 24 12, 16, 18, 20, 245. SYSTEMS REQUIREMENTSMinimum Slope (in. per ft.) 1/4:12 3:12Solid Decking (required, optional, or not used) OPTIONAL REQUIREDUnderlayment (type or NA) 30-LB. FELT OR EQUIVALENT 30-LB. FELT OR EQUIVALENT6. PANEL PROFILEVertical LegXTrapezoidalBatten X XOther (specify)7. SEAM PROCESSING: HEIGHT (inches) & SEALANT HEIGHT(S) (inches) / HEIGHT(S) (inches) /SEAM SEALANT: F= FACTORY APPLIED; SEAM SEALANT: F= FACTORY APPLIED;E = FIELD APPLIED; N = NONEE = FIELD APPLIED; N = NONEOverlappedCrimped (45 degrees) 1-1/2 / F, ERoll Formed (180 degrees) 1-1/2 / F, EDouble Roll Formed (two 180 degrees) 1-1/2 / F, ERoll and Lock 2-1/2 / F, ESnap-on Cap 1-1/2 / N 1 / FSnap Together 1-3/4 / F, E8. FASTENING METHODThrough-Fastened, ExposedThrough-Fastened, ConcealedCLIP, CONCEALEDFixed ClipXSlip Clip X XMoveable Clip (designed allowable movement, inches) 1-1/29. SPECIALTY APPLICATIONSCurved X XTaperedOther10. MANUFACTURER/PRODUCT DATAYear of First Commercial Use 1984 1984Number of Squares InstalledLicensed Applicator Agreement (yes/no) YES YESMethod of Distribution (distributors, direct) YES YESNumber of Regional Service LocationsFor Sales Information, Contact: 205/836-6777 205/836-6777For Technical Information, Contact: 205/836-6777 205/836-677711. ASTM E331 WATER PENETRATION TEST RESULTS NO PENETRATION @ 20 PSF NONE(results or none)FOR 15 MINUTESXX12, ASTM E 1646 WATER PENETRATION TEST RESULTS(results or none)13. ASTM E283 AIR INFILTRATION TEST RESULTS LEAKAGE AT SEAM NOT TO EXCEED 0.005 NONE(results or none)0.005 CFM PSF OF PANEL @ 10 PSFDIFFERENTIAL PRESSURE14. ASTM E 1680 (AIR INFILTRATION TEST RESULTS(results or none)15. FM/UL WIND UPLIFT RATINGS FOR ANY SPECIMEN UL-90 NONE16. SEE APPENDIX IF CHECKEDNA=not applicable284