hybrid operation, maintenance and warranty manual - Steyr Motors

CLEAN EFFICIENT POWERCLEAN EFFICIENT POWER2. FUNCTION OF HYBRID SYSTEM2.1. GeneralStarting procedure for the STEYR MOTORS Marine Hybrid Engine is the same for both cold and warm engines.The Engine Control Unit (=ECU) automatically regulates the fuel supply and the preheating period for anygiven temperature.Therefore the throttle lever should remain in neutral position.Hybrid Engines offer basically two different operation modes:• D-MODE for conventional operation of the combustion engineNOTE:If D-Mode is activated, SCC (=STEYR Control Center) displays system condition in menu “HCU” as followingillustrated:STEYR-CONTROL-CENTERR49.16.45N 48.08.56N 102.41.11W 014.27.47W 57,4 117 14:05 22:57GENER.SPEED/KN10.0 3410,51,5 rpm022 310rpm x 1000A455 3 4 43 85 4 85E-Mode ready26 °C bar 525D-Mode ready °C °C20 1090 86 HCU ok15050 120 6HCUOIL/BAR250250RPM2650 150050V01009870 131548,00E-Speed HCU/CURBATTERYHybrid statustus2,8 6.377.8 E-MOTOR 73TEMP/°C120MAINSWITCHGENER.Hybrid statusE-Mode readyD-Mode readyHCU ok11-013• E-MODE for electric operationNOTE:If E-Mode is activated, SCC (=STEYR Control Center) displays system condition in menu “HCU”as followingillustrated:STEYR-CONTROL-CENTER49.16.45N 48.08.56N 102.41.11W 014.27.47W 57,4 117 14:05 22:57GENER.SPEED/KN10.0 3410,51,5 rpm022 310rpm x 1000A455 3 4 43 85 4 85E-Mode ready26 °C bar 525D-Mode ready °C °C20 1090 86 HCU ok15050 120 6HCUOIL/BAR250250RPM2650 150050V01009870 131548,00E-Speed HCU/CURBATTERYHybrid statustus2,8 6.377.8 E-MOTOR 73TEMP/°C120MAINSWITCHHybrid statusE-Mode readyD-Mode readyHCU ok11-016Z001045-0_1_March 2012 - 13 -