hybrid operation, maintenance and warranty manual - Steyr Motors

CLEAN EFFICIENT POWERMain Switch to Hybrid Battery (min. 400Amps)*) Part not supplied from STEYR MOTORSMain Switch to Hybrid Battery (with min.400Amps capacity –see ill.) ensures 48V supply from Hybrid Batteryto Hybrid Control Unit (=HCU) is to switch OFF/ON manually.If 48V supply from Hybrid Battery is switched OFF/ON can be evaluated from SCC- menu “HCU “– parameter“BATTERY” (see below illustration)STEYR-CONTROL-CENTER49.16.45N 48.08.56N 102.41.11W 014.27.47W 57,4 117 14:05 22:57GENER.SPEED/KNRPM10.0 342650 15000,51rpm1,52 310rpm x 1000A450VMAIN050V10048,00BATTERY022502500100987E-Speed0131HCU/CUR5 48,00BATTERYHybrid statusSWITCH2055 3 4 43 85 4 85E-Mode ready26°C bar 525D-Mode ready °C °C1090 86 HCU ok15050 120 6 1202,8 6.377.8 E-MOTOR 73OIL/BARTEMP/°CHCU011-014300 AmpsFuse11-010Fuse to Hybrid Battery (min. 300Amps)*) Part not supplied from STEYR MOTORSProtects Hybrid Control Unit (=HCU) from short circuit with a fuse of min. 300Amps. (see ill.)NOTE:- STEYR MOTORS recommends to mount a fuse of min. 300Amps.- A further fuse of 425Amps is installed directly on Hybrid Control Unit PLUS- terminal to protectHybrid Control UnitAuxiliary Electric (connected to Hybrid Battery)*) Part not supplied from STEYR MOTORSThe installation of any additional electrical accessories connected to Hybrid Battery requires the protection ofindividual circuits.NOTE:- STEYR MOTORS recommends that electrical accessories are only connected to 48V Output ofHybrid Battery.- Per Hybrid System is a max. current consumption of 100Amps@48V (provided from HybridBattery to supply electrical accessories) permitted from STEYR MOTORS.Z001045-0_1_March 2012 - 55 -