hybrid operation, maintenance and warranty manual - Steyr Motors

More documents

Recommendations

Info

CLEAN EFFICIENT POWERSTARTE-ModeManualDrive12 VStartE-ModeManualDrive12 VStartONOFF11-035If engine does not start, release start – push button and button “12V Start” of Hybrid panel momentarily andrepeat starting procedure.5. As soon as engine starts, release ignition key (*only for SOLAS: start button). The audible alarm will stopwhen normal oil pressure has been reached.- 38 -Z001045-0_1_March 2012
3 4 43 85 4265251068 150120 6SWITCH2.6 Manual- Drive operation of Electrical- MODE (E-MODE) (OPTIONAL)For emergency situation STEYR MOTORS Hybrid Engines offer the possibility to operate the Electrical Mode(=E-Mode) manually via “Manual Drive”- button located on Hybrid panel (see below illustration).E-ModeManualDrive12 VStartA B CE-ModeManualDrive12 VStartCLEAN EFFICIENT POWER“Manual- Drive” function can be operated if communication- problems between EMS (=Engine ManagementSystem) and HCU (=Hybrid Control Unit) are evident.11-027In following fault- table are the different fault indications described when button “Manual-Drive” can be activated:FAULT SCC-Indication status Instrument panel-indication statusMenu"HCU" notSTEYR-CONTROL-CENTER49.16.45N 48.08.56N 102.41.11W 014.27.47W 57,4 117 14:05 22:57OFFONSTART0,7 sec0,7 sec0,7 secevident onSCCSPEED/KN10.0 34012 3rpm x 100045bar °CRPM2650 1500MAIN11-0312,8 6.377.8 73OIL/BARTEMP/°C11-033Z001045-0_1_March 2012 - 39 -
Page 1 and 2: HYBRIDOPERATION, MAINTENANCEAND WAR
Page 3 and 4: WELCOME ABOARDCongratulations on yo
Page 5 and 6: TABLE OF CONTENTS1. GENERAL PART ..
Page 7 and 8: 1.2. Product References, Illustrati
Page 11 and 12: 1.15. SymbolsCertain symbols or com
Page 13 and 14: CLEAN EFFICIENT POWERCLEAN EFFICIEN
Page 15 and 16: 2.3 Starting/Stopping a Hybrid Engi
Page 17 and 18: Check following parameters on scree
Page 19 and 20: *) Starting/Stopping the Hybrid- En
Page 21 and 22: Check following parameters on scree
Page 23 and 24: 3 442651023 854512060200,51551,5290
Page 25 and 26: CLEAN EFFICIENT POWER6. To start E-
Page 27 and 28: CLEAN EFFICIENT POWER1. Move thrott
Page 29 and 30: *) Starting/Stopping the Hybrid- En
Page 31 and 32: CLEAN EFFICIENT POWERCheck followin
Page 33 and 34: CLEAN EFFICIENT POWERSTOPPING HYBRI
Page 35 and 36: CLEAN EFFICIENT POWERVARIANT B:1. P
Page 37: CLEAN EFFICIENT POWER1.To start the
Page 41 and 42: E-ModeManualDrive12 VStartE-ModeMan
Page 43 and 44: CLEAN EFFICIENT POWERNOTE:In case o
Page 45 and 46: 2.10 Gear Box - InformationNOTE: Yo
Page 47 and 48: CLEAN EFFICIENT POWER2. Ignition ON
Page 49 and 50: CLEAN EFFICIENT POWER• in E-Mode
Page 51 and 52: Instrument PanelHybrid Engines are
Page 53 and 54: • HCU is limiting or stopping cha
Page 55 and 56: CLEAN EFFICIENT POWERMain Switch to
Page 57 and 58: If temperature-values exceed from S
Page 59 and 60: 2.17 Diagnostic systemThe electroni
Page 61 and 62: 2.19 Economy in Electrical-MODE (E-
Page 63 and 64: THIS PAGE IS INTENTIONALLY BLANKZ00
Page 65 and 66: Z001045-0_1_March 2012 - 65 -4.2 Tr
Page 67 and 68: Z001045-0_1_March 2012 - 67 -
Page 69 and 70: 4.3. Reading Service Codes/Alarms f
Page 71 and 72: CODE ABBREV. 150 PINWIREChart -Serv
Page 73 and 74: 5.2. Preparation for Off Season Sto
Page 75 and 76: THIS PAGE IS INTENTIONALLY BLANKZ00
Page 77: SERVICENETWORKAUSTRIASTEYR MOTORS G

hybrid operation, maintenance and warranty manual - Steyr Motors

Create successful ePaper yourself

Delete template?

Save as template?