iE2820 - Permo Electronics

11 TONE SQUELCH AND POCKET BEEPD Setting DTCS codeq Push [F• ] to display the function guide.w Push [MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.e Rotate [DIAL] to select “DUP/TONE…” then push[MAIN•BAND].r Rotate [DIAL] to select “DTCS CODE” then push[MAIN•BAND].t Rotate [DIAL] to select the desired DTCS code then push[MAIN•BAND].• Each operating band and each memory channel have independentsettings.•See the table at right for available DTCS code.z Push [SET B(D-OFF)] to enter set mode.x Push [Y]/[Z] several times to select“DUP/TONE…” then push [SET B(D-OFF)].c Push [Y]/[Z] several times to select “DTCSCODE” then push [SET B(D-OFF)].v Push [Y]/[Z] to select the desired DTCS codethen push [SET B(D-OFF)].b Push [CLR A(MW)] to exit DUP/TONE set mode.•Available tone frequency67.069.371.974.477.0SETB79.782.585.488.591.594.897.4100.0103.5107.2110.9114.8118.8123.0127.3131.8136.5141.3146.2151.4156.7159.8162.2165.5167.9171.3173.8177.3179.9183.5186.2189.9192.8196.6199.5203.5206.5210.7218.1225.7229.1233.6241.8250.3254.1•Available DTCS codey Push [BACK](V/MHz•SCAN) (Right band’s) to exit fromDUP/TONE set mode.DTCS mode can be selected in “DTCS POLARITY” menu.(p. 88)02302502603103203604304705105305406507107207307411411511612212513113213414314515215515616216517217420521222322522624324424524625125225526126326526627127430631131532533133234334635135636436537141141241342343143244544645245445546246446546650350651652352653254656560661262462763163265466266470371272373173273474375487