iE2820 - Permo Electronics

PANEL DESCRIPTION1D Function guide 2The function guide 2 indicators appear only when the optionalUT-123 is installed and DV mode is selected.i o !0 !1 !2 !3 uiCALL SIGN SELECT KEY [CS](V/MHz•SCAN) (p. 38)Push to display the call sign selection screen.oRECEIVED CALL SIGN RECORD KEY[CD](M/CALL•MW) (p. 47)Push to display the received call sign record screen.!0CQ KEY [CQ](DUP•MONI) (p. 39)Push to set “CQCQCQ” as the station call sign for the call.!1CALL SIGN SET KEY [R>CS](TONE•DTMF) (p. 47)Push to copy and set the previously received station callsign as the station call sign for making a call.!2DV MESSAGE KEY [MSG](LOW•PRIO) (p. 53)Push to display the DV message screen.!3VOICE MEMORY KEY [REC](V/MHz•SCAN) (p. 58)Push to display the DV voice memory record screen.D Function guide 3The function guide 3 indications appear only when the optionalUT-123 is installed and GPS function is set to ON.!4 !5 !6 !7 !8 u!4DATA KEY [DATA](V/MHz•SCAN) (p. 123)Push to toggle GPS data communication ON and OFF.•“G•D” appears when the GPS data from GPS receiver is selected.!5POSITION INFORMATION KEY [POSI](M/CALL•MW)(p. 123)Push to toggle your own position information, target stationinformation screen and frequency indication.!6GPS DATA STORE KEY [G-WR](DUP•MONI) (p. 123)Push and hold for 1 sec. to store your own current positioninformation.!7GPS MEMORY RECALL KEY [GMR](TONE•DTMF) (p. 126)Push to cause the GPS memory screen to display thestored position information.!8RECEIVED POSITION DATA STORE KEY[R-WR](LOW•PRIO) (p. 125)Push and hold for 1 sec. to store the received position information.123456789101112131415161718198