iE2820 - Permo Electronics

TONE SQUELCH AND POCKET BEEP11■ Digital call sign/digital code squelchNOTE: Use digital code squelch when operating with two ormore stations. Because the digital call sign squelch functionrecognizes “MY CALL SIGN,” the digital call sign squelchfunction can be used when operating with only one station.q Set the desired operating frequency in DV mode, Digitalcode and MY CALL SIGN.w Push [TONE•DTMF] several times to activate the digitalcode or digital call sign squelch. (DSQL or CSQL)• Digital call sign squelch “DSQL,” Digital call sign beep “DSQL ,”Digital code squelch “CSQL,” Digital code beep “CSQL ” andno tone operation are activated in order.e Operate the transceiver in the normal way.r When the received signal includes a matching callsign/code, the squelch opens and the signal can be heard.• When the received signal’s call sign/code does not match, digitalcall sign/digital code squelch does not open; however, the S/RFindicator shows signal strength.Digital call sign pocket beepDigital call sign squelchDigital code pocket beepDigital code squelchD YOUR and MY call signs settingSee page 38 for DV MODE OPERATION.D Digital code settingThe optional UT-123q Push [F• ] to display the function guide, then push[MODE](V/MHz•SCAN) (Left band’s) several times to selectDV mode.w Push [MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.e Rotate [DIAL] to select “DV SET MODE” then push[MAIN•BAND].r Rotate [DIAL] to select “DIGITAL CODE” then push[MAIN•BAND].t Rotate [DIAL] to select the desired digital code (00–99)then push [MAIN•BAND].• Each operating band and each memory channel have independentsettings.y Push [BACK](V/MHz•SCAN) (Right band’s) twice to returnto frequency indication.1234567891011121314151617181990