iE2820 - Permo Electronics

13 MENU SCREEN OPERATION■ SCAN itemsD Scan timerSelects scan resume timer from T-15 (default), T-10, T-5 andP-2.•T-15/10/5 : Scan pauses for 15/10/5 sec., then resumes.• P-2 : Pause on a signal until signal disappears,then resumes 2 sec. after the signal disappears.D Program skip scanSets programmed skip scan setting from ON (default) andOFF for full scan or programmed scan operation.D Bank link scanSets the memory bank link function ON and OFF (default). Thelink function provides continuous bank scan, scanning all contentsin the selected banks during bank scan.• Bank link settingq Enter MENU screen via function guide.➥ Push [F• ] to display function guide.➥ Push [MENU](V/MHz•SCAN) (Right band’s) to enterMENU screen.w Rotate [DIAL] to select “SCAN,” then push [MAIN•BAND].e Rotate [DIAL] to select “BANK LINK,” then push[MAIN•BAND] to enter bank setting.r Rotate [DIAL] to select the desired bank initial, then push[MAIN•BAND].t Rotate [DIAL] to turn ON (default) and OFF the link setting,then push [MAIN•BAND].y Rotate [DIAL] to select next bank and repeat steps r tot, or push [BACK](V/MHz•SCAN) (Right band’s) threetimes to exit scan set mode.103