iE2820 - Permo Electronics

MENU SCREEN OPERATION13D GPS-A symbolSelects the desired GPS-A symbol.Available symbols: Ambulance, Bus, Fire Truck, Bicycle,Yacht, Helicopter, Small Aircraft, Ship(Power Boat), Car (default), Motorcycle,Balloon, Jeep, Recreational Vehicle,Truck, Van, OtherIf “Other” is selected, set the desired symbol code as follows;qPush [MAIN•BAND] to enter programming condition.wRotate [DIAL] to select the 1st character from “\” and “/.”ePush [>](M/CALL•MW) (Left band’s) to select the 2nd digit.rRotate [DIAL] to select the 2nd digit character.tPush [MAIN•BAND] to program the symbol code.When “Other” is selected, check the symbol codes ofAPRS, ® and set it correctly.D CommentProgram up to a 43-character* comment. The programmedcomment is transmitted with the GPS position data.*36-character comment can only be programmed when“COURSE/SPEED” is selected in data extension.qPush [MAIN•BAND] twice to enter programming condition.wRotate [DIAL] to select the desired character.• Push [Aa](TONE•DTMF) to select the character group from capitalletters or lower case letters.• Push [1/](M/CALL•MW) (Right band’s) to select the charactergroup from numbers or symbols.• Push [>](M/CALL•MW) (Left band’s) or [