iE2820 - Permo Electronics

OTHER FUNCTIONS14D Cloning using a personal computerData can be cloned to and from a personal computer (Microsoft® Windows ® 98SE/2000/Me/XP) using the optional CS-2820 CLONING SOFTWARE and the optional datacommunication cable; OPC-1529R or cloning cable; OPC-478/478U. Consult the CS-2820 CLONING SOFTWARE HELP filefor details.D Cloning errorNOTE: DO NOT push any key on the transceiver (to becloned) during cloning. This will cause a cloning error.When the display appears as below, a cloning error has occurred.If this happens, turn the transceiver (to be cloned) power OFFthen ON again and cloning must be repeated.■ Auto power OFFThe transceiver can be set to automatically turn OFF after aspecified period with a beep when no switch is pushed.120 min., 90 min., 60 min., 30 min. and OFF can be specified.The specified period is retained even when the transceiveris turned OFF by the auto power-off function. To cancelthe function, select “OFF” in the auto power-off item in setmode.This can be selected with “AUTO POWER OFF” in set mode.(p. 109)■ Time-out timerTo prevent accidental prolonged transmission, etc., the transceiverhas a time-out timer. This timer cuts a transmissionOFF after 3, 5, 15 or 30 min. of continuous transmission. Thistimer can be cancelled (default).Approx. 10 sec. before the time-out timer is activated, thetransceiver emits a beep tone as a warning.This can be selected with “TIME-OUT TIMER” in set mode.(p. 109)12345678910111213141516171819116