iE2820 - Permo Electronics

SCAN OPERATION8■ Skip channel settingThe memory skip function speeds up scanning by checkingonly those memory channels not set as skip channels. Setskip channels as follows.qSelect a memory channel in the desired band (Left or Right):➥ Push the desired band’s [M/CALL•MW] to select memorymode.➥ Rotate the same band’s [DIAL] to select the desiredchannel to be a skip channel.wPush [F• ] to display the function guide.ePush [SKIP](TONE•DTMF) to select the skip conditionfrom “≈,” “P≈” or “OFF (no indication)” for the selected channel.•“≈” (SKIP): The channel is skipped during memory or bankscan.•“P≈” (PSKIP): The channel is skipped during memory/bank scanand the programmed scan.: The channel is scanned during any scan.] once or twice to exit the function guide indi-•“__” (OFF)rPush [F•cation.Skip indicator appears1234567891011121314151617181978