iE2820 - Permo Electronics

DV MODE OPERATION (Optional UT-123 is required)5■ DV automatic detectThe “DV” mode indicator blinks when a non-DV signal is receivedduring DV mode operation.The IC-E2820 DV automatic detection monitors in FM modewhen other than DV mode signal is received.qPush [F• ] to display the function guide.wPush [MENU](V/MHz•SCAN) (Right band’s) to display theMENU screen.eRotate [DIAL] to select “DV SET MODE” then push[MAIN•BAND].rRotate [DIAL] to select “DV AUTO DETECT” then push[MAIN•BAND].tRotate [DIAL] to turn the DV automatic detect function ONand OFF, then push [MAIN•BAND].OFF : “DV” mode indicator blinks, however the transceiverreceives in DV mode even if non-DV modesignals are received. (default)ON : “DV” mode indicator blinks and the transceivermonitors the signal in FM mode.yPush [BACK](V/MHz•SCAN) (Right band’s) twice to exitfrom DV set mode.NOTE: The received FM audio may be distorted when receivingan FM signal with the DV automatic detect functionactive.1234567891011121314151617181940