iE2820 - Permo Electronics

More documents

Recommendations

Info

8SCAN OPERATION■ Scan typesScanning searches for signals automatically and makes iteasier to locate new stations for contact or listening purposes.There are 4 scan types and 4 resume conditions to suit youroperating needs.FULL SCAN (p. 74)118.000MHzScanJump*depends on left or right band.549.995*MHzRepeatedly scans all frequenciesover the entire band.Some frequency ranges arenot scanned according to thefrequency coverage of thetransceiver’s version.MEMORY (SKIP) SCAN(p. 74)SKIPM 1 M 2 M 3M 0 M 4M 499 M 6M 5SKIPRepeatedly scans memorychannels except those set asskip channel. Skip channelscan be turned ON and OFF infunction guide.PROGRAMMED SCAN(p. 74)Band Scan edges Bandedge xxA xxB edgeScanJumpRepeatedly scans betweentwo user-programmed frequencies.Used for checkingfor frequencies within a specifiedrange such as repeateroutput frequencies, etc.ALL/SELECTED BANKSCAN (p. 74)A99SKIPA00 A01 A02A98A05A04A03SKIPRepeatedly scans all bankchannels or selected bankchannels. The skip scan isalso available.73FREQUENCY/MEMORYSKIP FUNCTION (p. 78)BandedgeSKIPScanJumpSKIPBandedgeSkips unwanted frequenciesor channels that inconvenientlystop scanning. Thisfunction can be turned ONand OFF by pushing[SKIP](TONE•DTMF) inmemory mode.
SCAN OPERATION8■ Scan start/stopD PreparationScan resume condition (p. 77); program the scan edges(pgs. 75, 76); program 2 or more memory channels (pgs. 61,62); set skip settings, if desired (p. 78).D OperationqSelect VFO mode for full/programmed scan with[V/MHz•SCAN]; or memory mode for memory scan with[M/CALL•MW] in the desired band (Left or Right).• Select the desired bank with the same band’s [MAIN•BAND] forbank scan.wPush and hold the same band’s [V/MHz•SCAN] for 1 sec.eRotate the same band’s [DIAL] to select the scan typefrom ALL and programmed scan (PROG 0 to PROG 9), ifVFO is selected in step q.rPush the same band’s [V/MHz•SCAN] momentarily to startthe scan.• To change the scanning direction, rotate the same band’s [DIAL].•The memory channel readout blinks the scan type as follows:tTo stop the scan, push the same band’s [V/MHz•SCAN].z Push [VFO/LOCK] to select VFO mode forfull/programmed scan; push [MR/CALL] to selectmemory mode for memory scan, in the mainband.• Push [FUNC] then [MONI 1(BANK)] to select a bankfor bank scan.x Push [SCAN 2(T-SCAN)].c Push [Y] or [Z] to select the ALL and programmedscan (PROG 0 to PROG 9), if VFO is selectedin step z.v Push [SCAN 2(T-SCAN)] again to start the scan.• Push [Y] or [Z] for 1 sec. also starts the scan.b To stop the scan push [SCAN 2(T-SCAN)] or[CLR A(MW)].• During full scan • During programmed scan • During memory scan • During bank scanRotate [DIAL] to select “ALL”(full) or programmed scan (P1to P9) in sequence.Indicates scan edge channels.• P1 stands for 1A/1BSCAN2Indicates bank initial.1234567891011121314151617181974
Page 1 and 2:
INSTRUCTION MANUALDUAL BAND FM TRAN
Page 3 and 4:
PRECAUTIONSRWARNING RF EXPOSURE! Th
Page 5 and 6:
TABLE OF CONTENTS12FOREWORD .......
Page 7 and 8:
13 MENU SCREEN OPERATION ..........
Page 9 and 10:
QUICK REFERENCE GUIDED LocationSele
Page 11 and 12:
QUICK REFERENCE GUIDED Optional GPS
Page 13 and 14:
QUICK REFERENCE GUIDEwAttach the re
Page 15 and 16:
QUICK REFERENCE GUIDED DC power sup
Page 17 and 18:
QUICK REFERENCE GUIDE■ Your first
Page 19 and 20:
QUICK REFERENCE GUIDE■ Repeater o
Page 21 and 22:
QUICK REFERENCE GUIDEUsing the HM-1
Page 23 and 24:
PANEL DESCRIPTION1yuiLeft band*The
Page 25 and 26:
PANEL DESCRIPTION1➥ During DV* (D
Page 27 and 28:
PANEL DESCRIPTION1@3@4@2FREQUENCY M
Page 29 and 30:
PANEL DESCRIPTION1D Function guide
Page 31 and 32:
PANEL DESCRIPTION1iANTENNA CONNECTO
Page 33 and 34:
PANEL DESCRIPTION1■ Microphone ke
Page 35 and 36:
PANEL DESCRIPTION1■ Optional Micr
Page 37 and 38:
SETTING A FREQUENCY2BANKY/Zz Push [
Page 39 and 40:
SETTING A FREQUENCY2■ Tuning step
Page 41 and 42:
BASIC OPERATION3■ ReceivingqSet t
Page 43 and 44: BASIC OPERATION3■ Squelch attenua
Page 45 and 46: BASIC OPERATION3■ Sub-band mute/b
Page 47 and 48: BASIC OPERATION3When diversity oper
Page 49 and 50: BASIC OPERATION3D Single sweepqSet
Page 51 and 52: REPEATER OPERATION4■ Accessing a
Page 53 and 54: REPEATER OPERATION4■ Subaudible t
Page 55 and 56: REPEATER OPERATION4■ Offset frequ
Page 57 and 58: DV MODE OPERATION (Optional UT-123
Page 81 and 82: MEMORY MODE OPERATION6■ General d
Page 83 and 84: MEMORY MODE OPERATION6D Programming
Page 85 and 86: MEMORY MODE OPERATION6■ Memory ba
Page 87 and 88: MEMORY MODE OPERATION6[EXAMPLE]: Pr
Page 89 and 90: MEMORY MODE OPERATION6D Memory/call
Page 91 and 92: MEMORY MODE OPERATION6■ Erasing/t
Page 93: CALL CHANNEL OPERATION7■ Programm
Page 97 and 98: SCAN OPERATION8D Programming scan e
Page 99 and 100: SCAN OPERATION8■ Skip channel set
Page 101 and 102: PRIORITY WATCH9■ Priority watch o
Page 103 and 104: DTMF MEMORY ENCODER10■ Transmitti
Page 105 and 106: DTMF MEMORY ENCODER10■ DTMF speed
Page 107 and 108: TONE SQUELCH AND POCKET BEEP11D Rev
Page 109 and 110: TONE SQUELCH AND POCKET BEEP11■ D
Page 111 and 112: TONE SQUELCH AND POCKET BEEP11■ D
Page 113 and 114: PAGER/CODE SQUELCH12D Code programm
Page 115 and 116: PAGER/CODE SQUELCH12• PERSONAL CA
Page 117 and 118: MENU SCREEN OPERATION13■ Menu lis
Page 119 and 120: MENU SCREEN OPERATION13D SOUNDSITEM
Page 121 and 122: MENU SCREEN OPERATION13D Squelch de
Page 123 and 124: MENU SCREEN OPERATION13D Repeater c
Page 125 and 126: MENU SCREEN OPERATION13■ DUP/ TON
Page 127 and 128: MENU SCREEN OPERATION13D Opening lo
Page 129 and 130: MENU SCREEN OPERATION13■ DV GPS i
Page 131 and 132: MENU SCREEN OPERATION13D Alarm area
Page 133 and 134: MENU SCREEN OPERATION13D GPS-A symb
Page 135 and 136: OTHER FUNCTIONS14■ All resetThe f
Page 137 and 138: OTHER FUNCTIONS14D Cloning using a
Page 139 and 140: OTHER FUNCTIONS14D 1200 bps packet
Page 141 and 142: OTHER FUNCTIONS14D Adjusting the tr
Page 143 and 144: GPS/GPS-A OPERATION15yPush [BACK](V
Page 145 and 146:
GPS/GPS-A OPERATION15o Rotate [DIAL
Page 147 and 148:
GPS/GPS-A OPERATION15D RX GPS messa
Page 149 and 150:
GPS/GPS-A OPERATION15■ GPS-A oper
Page 151 and 152:
MAINTENANCE16PROBLEM POSSIBLE CAUSE
Page 153 and 154:
SPECIFICATIONS AND OPTIONS17■ Spe
Page 155 and 156:
SPECIFICATIONS AND OPTIONS17OPC-171
Page 157 and 158:
ABOUT CE18Versions of the IC-E2820
Page 159 and 160:
MEMO138
Page 161 and 162:
MEMO140
Page 163 and 164:
MEMO142
show all

iE2820 - Permo Electronics

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?