iE2820 - Permo Electronics

More documents

Recommendations

Info

4 REPEATER OPERATIOND DTMF tonesDTMF-S➥ Push [DTMF-S], then push the keys of the desiredDTMF digits.• The function indicator lights green.• 0–9, A–D, ✱(E) and #(F) are available.• When “1” is displayed, cancel the DTMF memoryencoder in advance. (p. 82)• Push [DTMF-S] again to return the keypad to normalfunction control.Push ,then push desired keys.D 1750 Hz toneThe microphone has 1750 Hz tone capability, used for ringtone when calling, etc.TONE-1TONE-2z Push [FUNC].• The function indicator lights orange.x Push [✱(TONE-1)] to transmit a 1750 Hz tonecall signal for 0.5 sec.; push and hold[0(TONE-2)] to transmit a 1750 Hz tone callsignal for an arbitrary period.• The function indicator goes out automatically.Push ,then or .✔ For your convenience!The transceiver has 16 DTMF memory channels for autopatchoperation. See p. 81 for details.33
REPEATER OPERATION4■ Offset frequencyWhen communicating through a repeater, the transmit frequencyis shifted from the receive frequency by an amountdetermined by the offset frequency.Independent offset frequencies can be set for each operatingfrequency band.qPush [MAIN•BAND] to select the desired band (left or right)as the main band.wSelect the desired mode/channel you wish to set the offsetfrequency for, such as VFO mode or memory/call channel.ePush [F• ] to display the function guide then push[MENU](V/MHz•SCAN) (Right band’s) to enter MENUscreen.rRotate [DIAL] to select “DUP/TONE…”, then push[MAIN•BAND].tRotate [DIAL] to select “OFFSET FREQ” item, then push[MAIN•BAND].yRotate [DIAL] to set the desired offset frequency.• Push [MHz](V/MHz•SCAN) (Left band’s) to turn 1 MHz tuningON and OFF[F• ][DIAL][MAIN•BAND][MENU]uPush [BACK](V/MHz•SCAN) (Right band’s) twice to exitDUP/TONE set mode.SETBz Push [BAND] to select the desired band (left orright) as the main band.• Enter the desired frequency via the keypad if necessary.x Select the desired mode/channel you wish toset the offset frequency for, such as VFO modeor memory/call channel.• The offset frequency can be independently programmedinto each mode or channel.c Push [SET B(D-OFF)] to enter MENU screen.v Push [Y] or [Z] to select “DUP/TONE…” thenpush [SET B(D-OFF)].b Push [Y] or [Z] to select “OFFSET FREQ” thenpush [SET B(D-OFF)].n Push [Y] or [Z] to set the desired offset.• Direct frequency entry from the keypad is not possible.m Push [CLR A(MW)] to exit set mode.NOTE: The offset frequency can be set in amemory/call channel temporarily. However, theset frequency is cleared once another memorychannel or VFO mode is selected. To store theoffset frequency permanently, overwrite thechannel information.1234567891011121314151617181934
Page 1 and 2:
INSTRUCTION MANUALDUAL BAND FM TRAN
Page 3 and 4: PRECAUTIONSRWARNING RF EXPOSURE! Th
Page 5 and 6: TABLE OF CONTENTS12FOREWORD .......
Page 7 and 8: 13 MENU SCREEN OPERATION ..........
Page 9 and 10: QUICK REFERENCE GUIDED LocationSele
Page 11 and 12: QUICK REFERENCE GUIDED Optional GPS
Page 13 and 14: QUICK REFERENCE GUIDEwAttach the re
Page 15 and 16: QUICK REFERENCE GUIDED DC power sup
Page 17 and 18: QUICK REFERENCE GUIDE■ Your first
Page 19 and 20: QUICK REFERENCE GUIDE■ Repeater o
Page 21 and 22: QUICK REFERENCE GUIDEUsing the HM-1
Page 23 and 24: PANEL DESCRIPTION1yuiLeft band*The
Page 25 and 26: PANEL DESCRIPTION1➥ During DV* (D
Page 27 and 28: PANEL DESCRIPTION1@3@4@2FREQUENCY M
Page 29 and 30: PANEL DESCRIPTION1D Function guide
Page 31 and 32: PANEL DESCRIPTION1iANTENNA CONNECTO
Page 33 and 34: PANEL DESCRIPTION1■ Microphone ke
Page 35 and 36: PANEL DESCRIPTION1■ Optional Micr
Page 37 and 38: SETTING A FREQUENCY2BANKY/Zz Push [
Page 39 and 40: SETTING A FREQUENCY2■ Tuning step
Page 41 and 42: BASIC OPERATION3■ ReceivingqSet t
Page 43 and 44: BASIC OPERATION3■ Squelch attenua
Page 45 and 46: BASIC OPERATION3■ Sub-band mute/b
Page 47 and 48: BASIC OPERATION3When diversity oper
Page 49 and 50: BASIC OPERATION3D Single sweepqSet
Page 51 and 52: REPEATER OPERATION4■ Accessing a
Page 53: REPEATER OPERATION4■ Subaudible t
Page 57 and 58: DV MODE OPERATION (Optional UT-123
Page 81 and 82: MEMORY MODE OPERATION6■ General d
Page 83 and 84: MEMORY MODE OPERATION6D Programming
Page 85 and 86: MEMORY MODE OPERATION6■ Memory ba
Page 87 and 88: MEMORY MODE OPERATION6[EXAMPLE]: Pr
Page 89 and 90: MEMORY MODE OPERATION6D Memory/call
Page 91 and 92: MEMORY MODE OPERATION6■ Erasing/t
Page 93 and 94: CALL CHANNEL OPERATION7■ Programm
Page 95 and 96: SCAN OPERATION8■ Scan start/stopD
Page 97 and 98: SCAN OPERATION8D Programming scan e
Page 99 and 100: SCAN OPERATION8■ Skip channel set
Page 101 and 102: PRIORITY WATCH9■ Priority watch o
Page 103 and 104: DTMF MEMORY ENCODER10■ Transmitti
Page 105 and 106:
DTMF MEMORY ENCODER10■ DTMF speed
Page 107 and 108:
TONE SQUELCH AND POCKET BEEP11D Rev
Page 109 and 110:
TONE SQUELCH AND POCKET BEEP11■ D
Page 111 and 112:
TONE SQUELCH AND POCKET BEEP11■ D
Page 113 and 114:
PAGER/CODE SQUELCH12D Code programm
Page 115 and 116:
PAGER/CODE SQUELCH12• PERSONAL CA
Page 117 and 118:
MENU SCREEN OPERATION13■ Menu lis
Page 119 and 120:
MENU SCREEN OPERATION13D SOUNDSITEM
Page 121 and 122:
MENU SCREEN OPERATION13D Squelch de
Page 123 and 124:
MENU SCREEN OPERATION13D Repeater c
Page 125 and 126:
MENU SCREEN OPERATION13■ DUP/ TON
Page 127 and 128:
MENU SCREEN OPERATION13D Opening lo
Page 129 and 130:
MENU SCREEN OPERATION13■ DV GPS i
Page 131 and 132:
MENU SCREEN OPERATION13D Alarm area
Page 133 and 134:
MENU SCREEN OPERATION13D GPS-A symb
Page 135 and 136:
OTHER FUNCTIONS14■ All resetThe f
Page 137 and 138:
OTHER FUNCTIONS14D Cloning using a
Page 139 and 140:
OTHER FUNCTIONS14D 1200 bps packet
Page 141 and 142:
OTHER FUNCTIONS14D Adjusting the tr
Page 143 and 144:
GPS/GPS-A OPERATION15yPush [BACK](V
Page 145 and 146:
GPS/GPS-A OPERATION15o Rotate [DIAL
Page 147 and 148:
GPS/GPS-A OPERATION15D RX GPS messa
Page 149 and 150:
GPS/GPS-A OPERATION15■ GPS-A oper
Page 151 and 152:
MAINTENANCE16PROBLEM POSSIBLE CAUSE
Page 153 and 154:
SPECIFICATIONS AND OPTIONS17■ Spe
Page 155 and 156:
SPECIFICATIONS AND OPTIONS17OPC-171
Page 157 and 158:
ABOUT CE18Versions of the IC-E2820
Page 159 and 160:
MEMO138
Page 161 and 162:
MEMO140
Page 163 and 164:
MEMO142
show all

iE2820 - Permo Electronics

Create successful ePaper yourself

Delete template?

Save as template?