nbdp terminal dp-6

MIF FreezeMIF AGCMIF EmissionTX/RX MSG SaveEdit Before SendingTime SystemTime & DateDisplay modeTurn on to send "freeze" command toradio equipment connected. (RequiresFURUNO radio equipment.)Turn on to automatically control gain intelex mode. (Requires radio equipmentwhich supports AGC command in MIFformat.)Turn on to automatically change modeat radio equipment to telex. (Requiresradio equipment which supports Emissioncommand in MIF format.)Turn on to automatically save incomingand outgoing messages to floppy disk."No" transmits keying operation one byone. "Yes" transmits message only whenthe [Enter] key is pressed after confirmingtext typed.Select Time system. SMT is local timeand JST is Japan standard time.Enter Date and time manually. If a navigationdevice is connected, the time isautomatically set when the power isturned on or whenever the time systemis switched. Manual entry takes priorityover automatic entry. If there is nothe navigation data input, it takes morethan extra 10 seconds for automatic initialsettings.Select display mode between normal andreverse.Function key [F7]: WRU (Who Are You?)In the ARQ mode, requests other station's answerback code.Function key [F8]: HR (Here Is)In the ARQ mode, sends your ship's answerback code.2-11