nbdp terminal dp-6

4.2 Saving a FileBefore you can save a file to a floppy disk, the disk must be formatted.2HD Type is only available.Formatting Floppy Disks1. Press function key [F1].2. Press the [0] key to select "Floppy Disk Format".3. Press the [↑] key to select "YES".4. Press the [Enter] key.5. Insert a new floppy disk and press the [Enter] key.Saving a File1. Press function key [F1] to display the File menu.2. Press the [3] key. The screen should look something like Figure4-2.Save file ?Close TextYes( UNTITLED1 )NoFigure 4-2 Close text screen3. Press the [Enter] key. Enter file name, using up to eight characters.You may use any alphabet or numeric on the keyboard. Butyou may not use the following punctuation symbols;| : " > < ;!You may add an extension at the end of the file name, for example,.TXT, to distinguish text file from macro file.4. Press the [Enter] key.Note: When the working area is full, the message "File can't open"appears. Then, you would close a file to clear a working area inorder to open the file desired.4-2