PNEG-1156ETL - David Manufacturing Co.

2. Safety DecalsThe decals shown below and on Page 14 must be displayed as shown.Replacements are available upon request. Write to the following address:GSI Group1004 E. Illinois St.Assumption, IL. 62510Phone: 1-217-226-4421Please note:1. The decals shown below are not shown in actual size.2. Keep decals wiped clean at all times.3. Decals must be replaced if they are destroyed, missing, painted over or can no longer be read.DC-1948 - Bothsides of swivelbox plus junctionbox cover.HIGH VOLTAGE.Will cause seriousinjury or death.Lockout powerbefore servicing.HAUTE TENSIONCausera de sérieusesblessures ou la mort.Vérouillez le courantavant l’entretien.DC-1948Moving parts cancrush and cut. Keephands clear ofsprocket and chain.DC-1386DC-1386 - Top of gearmotor track frame.1067021 - Both sides of bottom motormounting rail in trolley and both sides ofoptional offset.DC-GBC-A and DC-GBC-1S -Should be located at any bin entry so it canseen and easily.Rotating flighting willkill or dismember.Flowing material willtrap and suffocate.Crusted material willcollapse and suffocate.Keep clear of all augers.DO NOT ENTER this bin!If you must enter the bin:1. Shut off and lock out all power.2. Use a safety harness and safety line.3. Station another person outside the bin.4. Avoid the center of the bin.5. Wear proper breathing equipment or respirator.Failure to heed thesewarnings will result inserious injury or death.DC-GBC-1APNEG-1156ETL Design III Series Grain Stir-Ator CSA 13