PNEG-1156ETL - David Manufacturing Co.

4. Assembly and InstallationTrolleyNOTE: 36' and larger double auger trolleys require the hold-down rods to be moved to the bottom holeposition. This is done by removing the spring clip and pulling the rod out and reinserting it in thebottom holes from the side away from the down auger motors. Make sure holes are aligned.(See Figure 4N for proper location the hold-downs.)Figure 4N1. Place trolley on the frame with the junction box toward the center of the bin. Double and triple augertrolleys are placed on the frame rails from the inboard end. (See Figure 4O.)Figure 4ONOTE: Slide trolley in before the inboard. Make sure down auger motors are on the opposite side ofthe gear motor.PNEG-1156ETL Design III Series Grain Stir-Ator CSA 27