PNEG-1156ETL - David Manufacturing Co.
PNEG-1156ETL - David Manufacturing Co.
PNEG-1156ETL - David Manufacturing Co.
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7. Service and MaintenanceCable TensionTo adjust the Stir-Ator cable tension, stop the unit so the trolley is not at the bin wall. Use the two (2)3/8" nuts to adjust the cable idler in or out to increase or decrease the tension on the cable. (See Figures 7A,7B and 7C.)Figure 7AFigure 7B3/8" Deflection requires 20-25# pressureFigure 7CCheck the tension between the idler pulleys on all units by using 20-25 pounds of pressure to move thecable 3/8" midway between the idlers. (See Figure 7C.)<strong>PNEG</strong>-<strong>1156ETL</strong> Design III Series Grain Stir-Ator CSA 73
Change language