PNEG-1156ETL - David Manufacturing Co.

4. Assembly and InstallationTrack InstallationNOTE: The wall track has two (2) different hole spacings: 18-15/16" on the single and double auger unitsand 12-5/8" on the triple auger units. (See Figure 4A.)Figure 4A1. The track is installed 10-1/4" distance from the eave of the bin to the center line of the track. Bins withsteeply pitched or domed roofs may allow the 10-1/4" distance to be reduced; roofs with low or flatprofiles may require more clearance. Reinforcements to the roof or roof ladder which might interferewith the movement of the Stir-Ator should be trimmed. (See Figure 4B.) If this cannot be done, the10-1/4" distance from the eave to the track bolt center line must be increased proportionately.Design III Stir-AtorFigure 4B20 PNEG-1156ETL Design III Series Grain Stir-Ator CSA