PNEG-1156ETL - David Manufacturing Co.

5. Operation**Number of Stir-Ator Augers Versus Fan and Heater SizesThe below and on Page 53 charts are based on ambient air temperature of 50°F, 60% relative humidity,16' (4.9 m) of corn and 7%-12% moisture removal (23.5%-16% final moisture). This chart is designed as aguide only. Fan performance will vary considerably from one manufacturer to another and other factors canchange the approximate bushels per day. Choose from Stir-Ator models with two (2) or three (3) augers tofit bins from 18' (3.5 m) to 48' (14.6 m). Each model gives you all the exclusive Stir-Ator features that canturn a simple bin into a wet-holding tank, dryer and storage bin - all in one unit.BinSize18'21'24'27'30'33'36'42'48'FanHP5.07.55.07.510.012.57.510.010 C12.515 C20 C7.510 C10.012.515 C20 C30 C7.510 C10.012.515 C20 C30 C10 C10.012.515 C20 C30 C10 C10.012.515 C20 C30 C10.012.515.020 C30 C40 C10.012.515 C20 C30 C40 C50 CHeated Air (Heat Rise above Ambient Temperature-Fahrenheit) - Corn-16'Drying RateMultipliers * forMore FansCFMfor1 FanStaticPressurefor 1 Fan25° 50° 75° 100° 125° 150°2 Fans 3 Fans BPD # Aug BPD # Aug BPD # Aug BPD # Aug BPD # Aug BPD # Aug1.21.21.21.21.21.21.31.21.51.31.4NA1.41.61.31.41.51.51.31.61.71.51.51.61.61.61.71.61.61.61.61.61.81.71.71.71.71.71.81.81.81.81.81.81.91.81.91.91.81.91.8NANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANANA2.42.32.42.42.42.42.72.52.62.62.52.62.466007100810091009200106001020011000113001200013100155001090012000122001310014100166001920011400125001290013900149001760020300128001320014600154001840021200131001350015000158001890021800138001560016400195002260026400139001600016700199002310026800316003.53.93.03.63.64.52.83.23.33.64.15.32.22.52.62.93.24.25.21.72.02.12.32.63.34.11.61.61.92.02.63.31.31.31.51.62.12.60.91.11.11.41.82.20.60.80.81.01.21.51.93604904505005105805606106206607208506006606707207809101060630690710760820970112070073080085010101170720740830870104012007608609001070124014507608809201100127014701740222222222222222222222222222222222222222222232222333750810920103010401200116012501280136014901760124013601380149016001880218012901420146015801690200023001450150016601750209024001490153017001790214024701560177018602210256029901580181018902260262030403580* All multiple fans are in parallel. Multiply drying rates x 0.77 for 10 point removal.Multiply drying rates x 1.35 for 5 point removal.All multiple fan static pressures (where multipliers are shown) fall within acceptable performance guidelines.** Stir-Ator down auger recommendations, as shown in the chart, are for stir-dry bins only. For grain flow continuous flow dryingsystem application, please refer to grain flow drying chart for down auger recommendations.222222222223222223322223332223332233332333362333666110011801350152015301770170018301880200021802580182020002030218023502770320019002080215023202480294033902130220024302570307035302180225025002630315036302300260027303250377044002320267027903320385044705270222223333333333333433333443333443334663366663666666148015901810203020602370228024602530268029303460244026802730293031503720429025502790288031103330393045402860295032603440411047402930302033503530422048703080349036704360505059003110358037304450516059907060223333333344333444434444444444444466666666666666666185019902270256025802980286030903170337036804350306033703430368039604660539032003510362039004180494057003590371041004330517059503680379042104440531061203880438046105480635074103900449046905590649075308800333333444444444444444444444444446666666666666666666224024002740308031203590346037303830407044405250369040704130444047804620650036804230437047105050596068804340447049505220623071804440457050805350640073904680529055606610766089404710542056606740783090801071033333344444444444444444444444444666666666666666666652 PNEG-1156ETL Design III Series Grain Stir-Ator CSA