PNEG-1156ETL - David Manufacturing Co.

1. SafetyPractice Safe MaintenanceUnderstand service procedures before doing work. Keep areaclean and dry.Never lubricate, service, or adjust machine while it is in operation.Keep hands, feet and clothing away from rotating parts.Keep all parts in good condition and properly installed. Fixdamage immediately. Replace worn or broken parts. Remove anybuilt-up grease, oil, and debris.Maintain Equipmentand Work AreaStay Clear of Rotating PartsCAUTION SHOULD BE EXERCISED if it is necessaryto enter the bin while the equipment is in operation.Entanglement in rotating augers will cause seriousinjury or death.Keep all shields and covers in place at all times.Wear close fitting clothing. Stop and lock out powersource before making adjustments, cleaning, ormaintaining equipment.Rotating Auger HazardOperate Motor ProperlyTo avoid serious injury or death, stay away from unit and make sureeveryone is clear of the equipment before starting or operatingthe unit.All electrical connections should be made in accordance withthe National Electric Code. Be sure equipment and bins areproperly grounded.Do not operate electric motor equipped units until motors areproperly grounded.Disconnect power on electrical driven units before resettingmotor overloads.Do not repetitively stop and start the drive in order to free a pluggedcondition. Jogging the drive in this manner can damage theequipment and/or drive components.Electric Shock HazardPNEG-1156ETL Design III Series Grain Stir-Ator CSA 7