Vacuum Catalogue - Edwards

Model 1575 Pressure DisplayThe Model 1575 Pressure Display is a low cost, microprocessor based, dig-ital display andset-point controller for the Barocel 600, 622 and 655 capac-itance manometers. The Model1575 incorporates power supply, digital display, four user-selectable set-points, along withanalog outputs in a compact 1/8 DIN package.4Features & BenefitsOrdering InformationPage162●●●●●Push button or remote zero adjustmentPush button full scale calibrationThere are four user programmable solid-state, open collectorset-points; two high and two low. The hysteresis bandassociated with each set-point can also be adjusted to meetsystem requirements.Easy to read LED displayOptional RS232 outputProduct DescriptionModel 1575, Analog Output, 115VModel 1575, Analog Output, 230VModel 1575, RS232 Output, 230VModel 1575, RS232 Output, 115VAccessories & SparesCable 1800 To 600 Length 15'Cable 1800 To 655 Length 15'Cable 622 Barocel 1501C/1575Order No.W60810000W60820000W60820004W60810004Order No.W18997005W18992005W18999005Linecord 2M North Euro PlugD40013030Linecord 2M UK PlugD40013025Linecord 2m With US PlugD40013120Technical DataSignal input± 10 V d.c.d.c. outputTransducer input signalA/D resolution± 25000 countsAccuracy1± 0.005% of reading ± 2 countsFull scale temperaturecoefficient20 ppm/ °CZero temperature coefficient 0.001 ppm/ °CZero suppression± 100% of full scaleTransducer supply±15 V d.c. at 250 mA(maximum)Electrical supply(50 - 60 Hz)Standard 230 V ac ± 10%Optional 115 V ac ± 10%Set-points (4 open collectortransistors)Voltage (maximum)50 VCurrent (maximum)100 mAHysteresis (both set-points) 0 - 99 countsControl statusLEDs indicate controls actuatedOperating temp range +0 to +55 °CStorage temp range -40 to +85 °CWarm-up time (at 25 °C) 30 minutesElectronic safety EN 61010-1Electromagnetic compatibilityEN 61326 Industrial Location,Class A EmissionsList of compatible transducers Barocel® 600, 655Shop online at www.edwardsvacuum.com